The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Madbull JP7 inch Hnadguard - Carabine. The JP Hand Guard System allows you to mount rails in any position for complete flexibility without wasted weight and features you don't need.
G&G Laser Sight for G2010/F2000 AEG- Polymer Made Handguard- With Metal Laser Sight- Rear button switch- For Mount on G&G G2010 Hunter / FN2000 Series Airsoft AEG Rifles- Powered by 3x CR123A Batteries (Batteries not included)
An aluminium diode flashlight powered by CR123A battery. Tempered glass is very durable to all sorts of shocks and the mount is resistant to small vibration and can be attached to any Picatinny 22 mm mounting rail. The set includes two switches: a gel button - pressure initiated and a second, traditional on/off button.
The M65 is traditional 'Nam' era design used by the U.S. Army since early 1970’s
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
King Arms High Torque Motor -- Type MEDIUM for AEG -- The Aluminum Axis Bushing.-- High-Torque Motor-- Case and End Bell with Ball Bearing installed-- King Arms airsoft Motor Pinion Gear (Thermal Treatment)
Utility backpack made by high density nylon material. Drawstring collar closure. Top-loading main compartment with flip top.
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
The bag is made of nylon fiber. Thanks to the large amount of dividers and pockets, it is possible to carry many tools and minor accessories. The bag can be mounted on the PALS webbing which meets the MOLLE standard, it can be worn on a waist belt or on the shoulder.
The main compartment is 215x80x170mm big and is equipped with a inner flat pocket. The exterior pocket which is located on the front part of the bag is 195x115x45mm big and is also equipped with flat compartments allowing to store documents or other flat objects such as medical patch.
Security policy
Delivery policy
Return policy
The bag is made of nylon fiber. Thanks to the large amount of dividers and pockets, it is possible to carry many tools and minor accessories. The bag can be mounted on the PALS webbing which meets the MOLLE standard, it can be worn on a waist belt or on the shoulder.
The main compartment is 215x80x170mm big and is equipped with a inner flat pocket. The exterior pocket which is located on the front part of the bag is 195x115x45mm big and is also equipped with flat compartments allowing to store documents or other flat objects such as medical patch.
The side pockets are 55x75x125mm big and are equipped with inner bands which allow to mount additional pockets. All of the compartments are closed with the use of a zipper. The back part of the bag is equipped with a flat compartment which is closed with the use of hooks&loops.
Made of: nylon
Weight: 500g
Color: olive
Dimensions: 170x320x80mm
Weight: 215 g Length: 460mm Material: plastic Width: 85mm Hydration pack capacity: 2,5 l NOTE! Hydration pack just for cold drinks.
Bite Valve Cover keeps Bite Valve clean from dirt and debris. This 2.5L Reservoir is perfect for upgrade or replacement of your current reservoir. Huge Omega Access Port make filling & cleaning a simple task, while still deliver a solid & secure seal.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
1 LITRE HYDRATION RESERVOIR BLADDER - OLIVE- Hydration pack just for cold drinks.
Utility backpack made by high density nylon material. Drawstring collar closure. Top-loading main compartment with flip top.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Shotgun pouch fitted with MOLLE system. 73 X 14 cm. Shotgun cover It"s made from durable nylon replica bag. Its dimensions make it an ideal choice for transporting your shotgun. It"s accordingly stiffened to prevent any distortions and increase your comfort during transport. It"s also equipped with adjustable shoulder strap mounted by metal carabiners....
Rifle bag Predator Rifflebag from 100% nylonLenght 122 cm
The load bearing system comprises of a case handle and a belt attached to both sides of the case.
Case Qty: 6 pcs Weight: 1600 g Material: 600D polyester Length: 900 mm Width: 65 mm Camouflage: woodland Height: 340 mm
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Spare hydration bladder Capacity: 2L
The bag is made of nylon fiber. Thanks to the large amount of dividers and pockets, it is possible to carry many tools and minor accessories. The bag can be mounted on the PALS webbing which meets the MOLLE standard, it can be worn on a waist belt or on the shoulder.
The main compartment is 215x80x170mm big and is equipped with a inner flat pocket. The exterior pocket which is located on the front part of the bag is 195x115x45mm big and is also equipped with flat compartments allowing to store documents or other flat objects such as medical patch.
