The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 1254 products.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity...
Green Gas Adapter for CO2 Replicas A Green Gas adapter made from high quality aluminum with the use of CNC technology, which allows for powering a CO2 replica with Green Gas. Compatible with 12g standard. Attention: Some replicas designed to use CO2 may not be compatible with Green Gas due to implementation of components requiring a gas of higher pressure!
Guarder airsoft hop up bucking improve shooting accuracy, ballistic trajectory stability, air-tightness & firmness. Constructed of Silica Gel that is hard.
Fits 20 mm Rails Materials : Reinforced Fibre Nylon Durable construction Quick release button to eject bipod
Flag Ierland Flag made of 100% polyester Dimension: 1 x 1,5 m
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: small TamiyaAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
Cartridge 6mm for Dan Wesson, 1 piece.
This Sportline model, the airsoft M56AL LONG 3-burst. The shotgun uses the realistic 30 BB shells and fires 3 rounds with each shot
Made by high density nylon material and metal hook. Snap hook rifle sling with snap on clip. Elastic bungee cord. Suitable for all rifle with sling swivel or hook. Adjustable length.
Made by high Plastomer. Avoid damaging the holographic sight. Perfect for outdoor war game activities. Material: Plastomer,
STTI - Special lubricant for soft air guns - 60 ml
Shim Set: 6x 0,2mm, 6x 0,3mm, 6x 0,5mm
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
Weight: 500 gMaterial: aluminum, plasticManufacturer: Hakkotsu
The adapter is made of aluminum with the use of CNC technology allows to attach the counter-clockwise 14mm diameter threads to the replicas equipped with a clockwise 13mm thread.
Nylon training knife,the blade made of soft rubber. The blade's length is 120 mm.
DESCRIPTION: Fostex Garments® BDU Pants The BDU pant is a lightweight pant ideal for outdoor activities and perfect as work / security pants. These strong outer pant is made of 65% polyester and 35% cotton. The BDU pants has a wide fit and is very durable. The BDU pant is often used for outdoor work, security work and outdoor activities such as hiking...
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
This replica of M16A1 features a special triangular shaped handguard, pistol grip, fixed stock, three prong flash hider, forward assist, fixed carry handle upper with rear iron sight making it an authentic looking M16A1 used in the Vietnam War. Receivers, carry handle with rear sight, flash hider, trigger guard, safety lever, front sight, forward assist,...
Made of plastic by a Taiwanese company HFC a replica of German compact pistol P8. Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
