The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Patch 4TAC God Will Judge Our Enemies made in 3D technology with high quality durable and flexible PVC.
Thanks to the material used and three-dimensional technique, these patches are very legible.
Attached with Velcro.
Diameter: 52 mm
Color: Coyote Brown
Fast 502 is a flashlight that can handle everything. It is ideal for tactical applications, and its made of aero grade 6061-T6 aluminum - it will not surrender even in the most difficult conditions. The torch generates light of 800 lumens, which in the hardest conditions can decide on the success of the mission. It is equipped with control on the cable,...
Battery 8.4V 1600 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
Paracord made of 100% nylon with iron buckle Length: 20 cm.
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Lightweight piston with high impact-durability Suitable for mainstream Airsoft AEG’s Reinforced piston provides extra duration during rapid & prolonged firing Suitable for Airsoft Electric AEG gearbox’s Material: Aluminium alloy Colour: Blue 14 half tooth rack
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
Replacement of Standard Magazine for Thompson M1A1 AEG . Plastic 6mm Bb's only . Capacity: 60 Rounds . Weight(Gram): 100
Weight: 190 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Length: 120 mm Width: 35 mm Accumulator voltage: 9,6 V Height: 17 mm Remember to use a dedicated charger to charge the battery. It is forbidden to charge the battery with a charger intended for a different type of...
Weight: 500 g Material: polymer Color: black Attention! Accessories shown in the last pictures are not part of the kit. NOTE! Max. head circumference: 60cm
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Set include 6pcs.
This is a must have part if you are looking for a replacement magazine lip & follower for your WE Open Bolt M4 Magazine. This set also allows you to convert your old AWSS (closed bolt) style mags to the new Open Bolt System. This kit will convert all your metal M4, M16, 416, 614, SCAR, PDW (Metal mag) magazines from Close bolt to open bolt. For the...
Magpul style ASAP Ambidextrous Sling Attachment Point for airsoft allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation
AEG Motor Brush - Designed to replace the original AEG Motor Brush Set
Patch 4TAC God Will Judge Our Enemies made in 3D technology with high quality durable and flexible PVC.
Thanks to the material used and three-dimensional technique, these patches are very legible.
Attached with Velcro.
Diameter: 52 mm
Color: Coyote Brown
