Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Historical Russian repeating airsoft gun rifle Mosin-Nagant model m1938 was manufactured by S&T Armament (Smart Team). It was a new gun introduced to the artillery, rear and auxiliary formations. It is recognizable because of the barrel shortened by 222mm. During World War II, it turned out that carbines were better suited as infantry weapons than rifles. However, the big disadvantage of this rifle was the lack of a bayonet, which is why the model was modernized in the 1944 version.
Please Note!!!
Estimated delivery time is 10-14 working days!
Historical Russian repeating airsoft gun rifle Mosin-Nagant model m1938 was manufactured by S&T Armament (Smart Team). It was a new gun introduced to the artillery, rear and auxiliary formations. It is recognizable because of the barrel shortened by 222mm. During World War II, it turned out that carbines were better suited as infantry weapons than rifles. However, the big disadvantage of this rifle was the lack of a bayonet, which is why the model was modernized in the 1944 version.
Realistic ASG spring bolt-action mechanism where each time after firing a shot, you have to manually reload the weapon via a bolt handle. The inner 640mm long barrel, a spring and a hop-up bucking in the VSR10 system (gives possible to upgrade the replica), and a steel cylinder (dimensions 24x193mm) and a metal trigger assembly with a 90-degree piston catch. The rifle has an adjustable hop-up system and a muzzle velocity of ~328fps.
A solidly made rifle replica with a handguard and a stock made of high-quality natural wood, a barrel, a front sight, an adjustable rear sight, a bolt, a magazine guard, a trigger guard, and a trigger made of metal alloys. In addition, the receiver has original markings, which additionally affects the realism of the replica.
Hop up: adjustable
Weight: 3100 g
Magazine material: plastic
Magazine model: low-cap
Material: wood, metal
Color: wooden
Fire type: single
Serial number: YES
Length mm: 1020
Inner barrel length mm: 480
Muzzle energy J: ~1
Magazine capacity BBs: 35
Muzzle velocity fps: ~328
Inner barrel diameter mm: 6.04
Gun Model: Mosin-Nagant
The set includes a [35-BBs capacity magazine]
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
CM040D replica The replica is made of steel and high-quality ABS. Made of steel are silencer , dummy pipe gas, body with gunbody cover, fire selector and other minor components of metal instead of steel applications, provides much greater resistance to a large variety of damage. The magazine is made of ABS (hicap) and pistol and front grip. The hop up...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version