The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 171 products.
Active filters
Instalation Kit for TITAN V3™ Kit contents: Selector plate stickers (3pcs) Trigger stickers (6pcs) Connectors set 0,15mm trigger anti-backlash stickers (3pcs) 0,30mm trigger anti-backlash stickers (3pcs) 0,50mm trigger anti-backlash stickers (3pcs) 0,3mm washers set 0,2mm washers set 0,1mm washers set Please note that material and colour of...
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
Instalation Kit for ASTER V2™ Kit contents: M2 mounting set M2.5 mounting set Connectors set Selector plate stickers Gearbox sticker Please note that material and colour of insulation washers included in the kit may differ between different batches.
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
Reinforced piston. High intensity polymer material. Elongated model POLYGONAL with 19 steel teeth. For SR25/R85/L85 series. Lightweight design and very robust. Compatible AEG electric guns. (Not compatible with A&K gearbox).
Airsoft Barrel Nut Wrench - Model: EX 331 - Weight: 95g - Gross Weight:110g - Made by Element - For DD Lite/RIS II M4A1/MK18/Omega X Series/PWS Diablo Rail/MK110/MK112/MK114/MK116
Lightweight piston with high impact-durability Suitable for mainstream Airsoft AEG’s Reinforced piston provides extra duration during rapid & prolonged firing Suitable for Airsoft Electric AEG gearbox’s Material: Aluminium alloy Colour: Blue 14 half tooth rack
It is a stock piston and piston head form CYMA, but it has been equipped with 15 steel teeth. Teeth are made of steel, which significantly contributes to the greater strength of the piston. Manufacturer: CYMA Weight: 30 g Material: ABS, steel CAUTION! Depending on the delivery, the piston may differ in color - there is no possibility of choosing a color....
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Ball-bearing silenced Bore-Up piston head A silenced Bore-Up piston head with ball-bearing. This is a high quality, made from durable polymer silenced piston head with ball-bearing. It is designed for use with Bore-up sets.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
Made of: Aluminum Weight: 10g Manufacturer: Super Shooter/SHS
Complete set of a silent aluminum piston head, complete with a polymer piston with a steel teeth rack. Producent: CYMA Weight: 30g Material: polymer, aluminum, gum, steel CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg)
