Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 171 products.
Active filters
G&P Airsoft AEG Upgrade Part Series " Polyamide Low Resistance " -- Selector Plate for Marui G3 Ver2 Gearbox -- "For Airsoft Electric Toy Gun Use Only"
Airsoft AEG Upgrade Part Series, Gearbox Spring for Version 2. Reversal Stop Latch Spring, Tappet Spring, Cover Spring, Cutoff Lever Spring, Switch Spring
As always, upgrading AEG, Design for any 6mm Gearbox Version, Suitable for ALL Airsoft Electric Gun
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
King Arms Airsoft AEG Upgrade Part Series - Selector Plate for Marui MP5 Ver2 Gearbox - Suitable For 6mm & 7mm Gear Box - Coated Copper Conductor
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, MP5-K/PDW series
Upgrade trigger for MP5 series.
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, P90 series
Safety cover for MP5/G3 series Made from the same heat resisting compound as other electrical components to ensure minimum wear. The ULTIMATE® Upgrade Series are made of reinforced material to secure the best performance and durability.
ARROW DYNAMIC AD Classic 6mm Bushing-- Full Metal Construction-- Design with 3 oil grooves to effectively increase the lubrication and wear resistance
Aluminium CNC Piston Head A high quality, metal, reinforced piston head - used mainly in upgrades.
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
Lightweight very durable nozzle with o-ring made from aluminum is great to achieve better tightness than with standard nozzle without o-ring. It have 20 mm long.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm