Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 108 products.
Active filters
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
3V CR1620 Lithium battery 1pcs. Suitable for most illuminated scope or dot sight. Also used for calculators, cameras, watches, computer motherboard and other electronic products.
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
Battery 8.4V 1600 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
1.5V AG13/LR44 Alkaline battery 2pcs pack. Suitable for most illuminated scope or dot sight. Also used for calculators, cameras, watches, computer motherboard and other electronic products.
Charger Specification: Input Voltage: 100-240V (AC)Charging Voltage: 3A maxMax Charging Rate: 25WCharger Type: LiPo/LiFe/NiMHLiPo/LiFe: 25/35NiMH: 1-85Balancing Current: 200 mAh NOTICE! Charges are covered only by starting warranty.
During charging LiPo battery needs to be remembered: * Use ONLY a charger approved for lithium batteries. * Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading. * DO NOT leave battery without supervision when it is charging. * DO NOT use broken cells. * Avoid prolonged charging, it can cause...
GFC Energy LiPo smartchargerA very intuitive and easy to use smartcharger by GFC Energy, equipped with a built-in balancer. Can be used to charge both 7,4 V as well as 11,1 V LiPo batteries. The charger is supplied with an autodetection system allowing it to Automatically go into standby mode after the charging process is finished.CAUTION! The charger...
Weight: 190 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Length: 120 mm Width: 35 mm Accumulator voltage: 9,6 V Height: 17 mm Remember to use a dedicated charger to charge the battery. It is forbidden to charge the battery with a charger intended for a different type of...
Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM.132S, CM.121S, CM.123S, CM125S and similar equipped with a small Deans connector. Does not...
Battery NiMH 1600mAh 9,6V - mini SF type [8FIELDS] Accumulator type: NiMH Accumulator voltage: 9.6 V Accumulator capacitance: 1600 mAh Accumulator cells type: mini Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
Battery 8.4V 1100 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
Battery NiMH 3000mAh 8,4V - large type [8FIELDS] Dimensions of pack: 154 × 45 × 22 (mm)Capacity: 3000 mAhVoltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Charger LED status;Power on; Green Normal; BrightStatus indicationCharging; RedFull Charged; GreenFailure; RED BLINK
LiPo 7.4V 1200 mAh 25/50C Battery Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited...
Weight: 160 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
Weight: 70 g Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm