Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 108 products.
Active filters
Charger LED status;Power on; Green Normal; BrightStatus indicationCharging; RedFull Charged; GreenFailure; RED BLINK
The USB-Link is used for connecting GATE TITAN and ASTER with PC, Mac or Android devices. Kit contents: USB-Link for GCS app USB-C cable [0.6 m / 1 ft 11 in] Micro-USB cable [0.6 m / 1 ft 11 in] 'Troubleshooting' Card Quickstart Guide
Microprocessor charger for small capacity batteries, for AEP pistol replicas. The charger is plugged into a USB, so we can charge our battery using many devices or even a power bank. After the battery is charged, the loading process will automatically stop. Thus, the battery is protected against damage. The charging process is signaled by LEDs. NOTICE!...
Plug and socket set. Large contact surface. Heat resistant polymer. Held in place with spring tension.
All the components to make a small Tamiya type plug.
Set of two lithium batteries CR2032 manufactured by Energy Cell Is used to power flashlights, dots and scopes with illuminated cross. One package includes two batteries. Weight: 10 g Diameter mm: 19 Battery voltage V: 3
Weight: 5 g code IP ALARM
Redox Alpha V2 battery charger COMBO (with power supply) A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the...
Redox Alpha V2 microprocessor battery charger A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the charger. It is...
Components to make a large male Tamiya plug.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
9.6V NiMH Butterfly / Nunchuck Battery For Electric AEG - 1600 mAh is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube. NOTICE! Batteries are covered only by starting warranty.
Battery 8.4V 1600 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
Battery 8.4V 1100 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Delta Charger with Integrated Balancer A specialist, microprocessor charger with an LCD display. The charger features quick charge option of various types of cells and is equipped with cell balancer, that enables more accurate charging of lithium packets, as well as highly-efficient microprocessor and specialist software. Delta charger is compatible with...
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...