The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Subcategories
There are 226 products.
Active filters
Makes reloading your standard magazines as easy as using a mechanical pencil. Just pour in your BBs, align the loading nozzle to the magazine.
Made of: brass Weight: 50g Diameter: 6,03mm Length: 229mm Manufacturer: PPS Airsoft, SHS
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
Included 3-Ring Hop-up Bucking Adjustable Outer Diameter Reduced Barrel Vibration Balanced Weight
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). 1 piece.
Airsoft AEG SHS Gearbox ver.7 Spring set - Steel Construction - Anti-Reversal Latch Spring- Power Box Spring- Cut Off Lever Spring- Tappet Spring
Low-resistance cable length of 2 m [IPower]
The ULTIMATE® 6mm bushings are perfectly suited for upgrading all TM-compatible gear boxes that use nylon bushings as standard.
It has a very wide menu, allowing selection of all the necessary parameters. It remembers the results of 25 shots, and for the correct readings, are responsible set of 14 sensors.
Upgrade trigger for MP5 series.
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
Safety cover for MP5/G3 series Made from the same heat resisting compound as other electrical components to ensure minimum wear. The ULTIMATE® Upgrade Series are made of reinforced material to secure the best performance and durability.
SILENCER ADAPTER FOR SNIPER RIFLE S24 - VSR10 * Weight: 55 g * Material: steel * Color: Black
King Arms Normal Torque Helical Gear Set -- All helical normal torque gears set -- Package included bevel, spur, and sector gear -- For Gearbox Version II and III Airsoft AEG
King Arms Airsoft AEG Upgrade Part Series - Selector Plate for Marui MP5 Ver2 Gearbox - Suitable For 6mm & 7mm Gear Box - Coated Copper Conductor
A.E.G spring 140 m/s [Guarder]Spring SP 140 [Guarder] with an uneven pitch AEG tuning.Both ends of the springs are polished.Compatible with AEG Facilities, except PSG-1.Equivalent to 140 Systema.Installation of the spring provides power outlet between 450 up to 480fps (muzzle velocity is dependent on other parts mounted in the interior of the gearbox)....
G&P Airsoft AEG STEEL Spur Gear Set For Marui Compatible Gearbox Version 2
Description Airsoft Maintenance Kit The WE Europe Airsoft Maintenance Kit is a must have Kit for any Airsoft enthusiast. This kit includes everything an airsofter would need to keep their GBB & AEG weapons in the best condition meaning no compromising on performance. The Kit Includes: - Plastic Lubricant Oil (60ml)- Oil Remover (60ml)- Pump...
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
GUARDER Steel Spring Guide with Ball Bearing -- For Marui Gearbox Ver II Airsoft AEG --
