The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 195 products.
Active filters
Element Low Pistol Flashlight Mount, Construction of Nylon Fiber Material , RIS Rail allow attachment of Flashlight & Laser Sight , e.g. STREAMLIGHT M3, SureFire X200, G&P M3.....etc
5KU Type 0 Aluminum Compensator for Marui Hi-Capa 5.1 (2-Tone)-- Aluminum Construction -- For Tokyo Marui Hi Capa 5.1 Series Airsoft Pistol-- 14mm Clockwise CW (Positive) Thread-- 2 Tone (Silver and Black) Color
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
Element Tango Down Stubby Vertical Grip black - Fit all 20mm RAS / RIS Rail System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
Element Full Length XT Rail Panel Covers 3pcs/Pack Black - Made by Element- Gross Weight:80g- Fit 20mm Rail- Material:Nylon Plastic
Element Full Length XT Rail Panel Covers 3pcs/Pack tan - Made by Element- Gross Weight:80g- Fit 20mm Rail- Material:Nylon Plastic
Well SILENCER ADAPTER FOR: MB03/MB08/MB01,08/MB10/MB11/MB12/MB4411A
FOSCO - Wistle 3 in 1 Wistle made of 100% plastic temperature, compass and wistle in 1
Scope made from aluminum with red aiming point illumination. It have eleven position of brightness regulation.
Zoom: 3 - 9x * Diameter of exit lens: 50 mm* Diameter of enter lens: 32 mm* Length: 315 mm* Tube diameter: 1 inch (25,4 mm) mat* Aiming instrument: aiming cross* Aiming cross regulation: vertical and horizontal* Optic: glass Set include: scope 3-9x40, lens cover and high mounting rings for 22 mm RIS rail.
Airsoft Scope 3-9x50EG with high mounting rings Material: ABS, aluminum Length: 315 mm Diameter of enter lens: 35 mm Diameter of exit lens: 50 mm Aiming instrument: cross Optic: glassWeight: 490 g
Zoom: 3 - 9x * Diameter of exit lens: 40 mm* Diameter of enter lens: 35 mm* Length: 285 mm* Aiming instrument: lightened aiming net with cross* Aiming cross regulation: vertical and horizontal* Optic: glassSet include: scope 3-9x40E, lens cover.
Airsoft 4X32mm military style cross reticle sight, Increasing aiming accuracy and reducing miss-fire, Come with 20mm weaver rail, Multi-coated optics, Resettable windage and elevation adjustment, Wide field of View
The MSA MOE/ACR Sling Attachment attaches directly to the airsoft MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3
Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. Designed to attach directly to MOE Hand Guards or ACR masada, the Scout Mount allows the use of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights. Models are available to position the light high at 11 o'clock (LEFT side...
Material: aluminum Optic: glass Reticle pattern: dot Lighting color: red, green Power; two LR44 batteries (button cells) Can looks slightly different!!! Please see pictures (dependence of delivery)!!!
Made by high Plastomer. Avoid damaging the holographic sight. Perfect for outdoor war game activities. Material: Plastomer,
Tactical 8-10 inch Picatinny Rail type Bipod- steel material- Built-in RIS Mount fit for any standard 20mm Picatinny Rail on any rifle
- Made by Element MOE Rifle Length Handguard for M4 / M16 (Tan) - weight: 295g- Color: TAN- Material:Polymer
Dog tag - Made of 100% metal- Gold color- (2 plates and 2 chains)
