The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Airsoft Scope 3-9x50EG with high mounting rings
Set include: airsoft scope 3-9×50EG, lens cover and high mounting rings for 22 mm RIS rail.
Technical details:
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
3-9 x 40 Scope, FREE MOUNT. The Strike Systems Pro Optics scopes are perfect choices when you need both functionality and classic looks. The lenses are fully coated for sharp and bright clear images.
- Full metal, adjustable - Fits 20mm weaver rails and comes with front fitting for WELL L96 sniper rifles - This bipod fits MB01, MB01/08, MB08
Quick detachable bipod with adjustable leg length is compatible with standard RIS rail. Also it can be attached to sling attachment in some replicas (look photos).
Tactical Quick Release 8-10 inch Clamp-on Bipod- Material: steel- Color: Black- FIT for barel AEG
The RedFiber scope from Theta Optics ™ is a guarantee of high quality at a reasonable price. Closed in a durable, metal housing, transparent optics with a cross hairs and x4 magnification. Thanks to the back light of the cross (red) the telescope can be successfully used in dynamically changing lighting. Highlight the optical fiber. A cross can be...
This protector will protect your Scope - Red Dot from damage.
Designed for use on SMGs and carbines to provide faster target acquisition and accuracy. The best for two eyes open shooting to give the operator greater zone control. It has 10 levels of brightness adjustment of the red aiming point. Fits all standard Picatinny/Weaver rails. Powered by a single CR2032 battery (not inluded). The sight comes from the...
A scope set with assembly dedicated to the Double Bell KAR98K replica. The parameters of the scope are 3-7x28, its tube with a diameter of 19mm is made of aluminum and the adjustment elements are made of plastic. Weight: 240 g Material: aluminum Color: black Optic: glass Length mm: 290
Zoom: 3 - 9x * Diameter of exit lens: 40 mm* Diameter of enter lens: 35 mm* Length: 285 mm* Aiming instrument: lightened aiming net with cross* Aiming cross regulation: vertical and horizontal* Optic: glassSet include: scope 3-9x40E, lens cover.
Zoom: 3 - 9x * Diameter of exit lens: 50 mm* Diameter of enter lens: 32 mm* Length: 315 mm* Tube diameter: 1 inch (25,4 mm) mat* Aiming instrument: aiming cross* Aiming cross regulation: vertical and horizontal* Optic: glass Set include: scope 3-9x40, lens cover and high mounting rings for 22 mm RIS rail.
Metal Constructed Killflash for ACOG scope. Easy to install with included elastic band. Protect your eyes blind from optical probe "OP" Flashlight (strong lighting). Able to protect the front lens of your ACOG scope.
Fits 20 mm Rails Materials : Reinforced Fibre Nylon Durable construction Quick release button to eject bipod
Optics mount rail for M1903A3. Fits an S&T bolt-action rifle replica without any modification. Weight: 55 g Material: aluminum Color: black Length mm: 136
Tactical 8-10 inch Picatinny Rail type Bipod- steel material- Built-in RIS Mount fit for any standard 20mm Picatinny Rail on any rifle
Scope made from aluminum with red aiming point illumination. It have eleven position of brightness regulation.
Airsoft Scope 3-9x50EG with high mounting rings
