The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 0.6kg
Price
Price
€2.00 - €83.00
Subcategories
There are 50 products.
Active filters
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
A set of three throwing knives from the spanish company Martinez Albainox.The knives are made of durable stainless steel.The knife blades are contoured and have one sharpened edge.The handle of the knife has partial notches under the fingers to improve the grip.There are also holes in the handle that improve the balance of the knife.The knife set is sold...
Inject valve for Green Gas powered magazines used in WE/KJW and Socom Gear pistol and carbine replicas. Overall length: 13 mm Tip diameter: 4.2 mm Thread diameter: 4.9 mm Tube diameter: 4 mm Weight: 1 g Manufacturer: Arma Tech
SHS Airsoft Electric Gun Upgrade Parts Series, 100:300 Gear Set, Low Noise Torque Type. Can be used at version 2 and version 3 gearbox.
Knife foldable under Smith&Wesson license. Thanks to its small size, it is perfect for everyday use. The 8Cr13MoV steel blade, covered with black oxide, is opened with a double sided thumb stud or with a flipper. Thin Clip Point blade cuts perfectly. It is locked with the liner lock. The handle is made of durable nylon additionally reinforced with...
Weight: 25 g Material: steel
Steel: 420 Stainless Handle: Aluminum Blade lenght: 84mm Blade thickness: 2,8mm Closed lenght: 119mm Weight: 124g
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
The reinforced complete V2 version gearbox was designed to be mounted in the M4 replica series. It is a perfect solution for those who want to buy a good gearbox in a reasonable price. The gearbox's frame was adapted to mount 7mm bearings and the V3 version allows to use it in the M4/M16 family carbine replicas.
Mechanism works well on not harder spring than 150 m/s. All gears are fabricated on CNC machines.
Tappet plate for V.2 gearbox
DESCRIPTION Made of aluminum double seal cylinder head for M4 replica.Precisely machined on CNC, guarantees high compression.CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled.
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
Made from one piece of steel, 420 in technology full tang knife, light and handy with a blade tanto. Ergonomically shaped handles and rubber linings make sure Perhaps in the hand. Includes leather sheath with metal clip, which can be attached to a belt, vest, backpack. Steel: 420 Blade Length: 121mm, Blade Thickness: 3mm, Overall length: 229mm,...
- HIGH TORQUE long motor - Manufacturer CYMA - Fits to: series MP5, G3, M4, P90, M16, M15, SR4
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
6,03 steel precision inner barrel - 300 mm Precision inner barrel with a length of a 300 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Trigger Assembly for VSR10 45° piston sear captures
Complete assembly cylinder for MB01 / 04/05/08 series replicas Made of: metal Application: MB01, MB04, MB05, MB08 Producer: WELL
