Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 1410 products.
Active filters
Color: white Weight: 0,25g (4000rds) Dimensions: 5,96 +/- 0,01mm Double polishing Manufacturer: Rockets™
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
The dummy silencer has a left and a right thread with a diameter of 14mm. Inside there is a special foam.
7075-T6 aluminium alloy construction - CNC machining and high precision - Dual O-Ring design for better air sealing - Rubber cushion to absorb shock - For AEG Ver. 2 gear box (M4M16G3MP5SCARKAC PDWMASADASR25AR10)
CNC Aluminum dummy silencer features a built-in tracer unit with a high power flash and ultra-sensitive motion sensor. Powered by 4x AAA batteries.Warning! When installing the batteries, make sure that the device is turned off and avoid touching sensitive electronic components - you will avoid short circuits and the risk of electric shock.
The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch. The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo. Stock up on this throwing knife set and limit your time walking back and forth to your target!Technical data:- Steel: 2Cr13- Rockwell hardness: 50-53- Overall length: 237 mm-...
Lightweight piston with high impact-durability Suitable for mainstream Airsoft AEG’s Reinforced piston provides extra duration during rapid & prolonged firing Suitable for Airsoft Electric AEG gearbox’s Material: Aluminium alloy Colour: Blue 14 half tooth rack
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
Holographic Tactical 551 Dot Sight TAN, the best for two eyes open shooting and when you need speed and accuracy. Guarantees faster target acquisition and gives the operator greater zone control. Fits all standard Picatinny/Weaver rails.
Zoom: 3 - 9x * Diameter of exit lens: 40 mm* Diameter of enter lens: 35 mm* Length: 285 mm* Aiming instrument: lightened aiming net with cross* Aiming cross regulation: vertical and horizontal* Optic: glassSet include: scope 3-9x40E, lens cover.
Patch 3D PVC Evil smiley brown - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
For: v.2 and v.3 gearboxes Transfer: 13:1 Made of: Steel Weight: 70g Manufacturer: SHS
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet. Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head. Characteristics: - Retains its shape, flexibility...
The replica is made entirely from metal, with the exception of, naturally, grip panels and a magazine base that is made from ABS. In combination with excellently operating and powerfully “kicking” blow-back, it provides increased realism as well as influences significantly the durability of the construction
Purpose: M4 Replicas Material: Aluminium Length: 20.90mm Manufacturer: Cyma
Knight`s type short front grip designed for 22 mm RIS rail. Weight: 85 g Material: nylon Color: black Length: 95 mm
Forward grip for RIS rail, has a quick assembly system without tools. Weight: 90 g Color: black
Electric Pistol Great Starter Sidearm Fully Automatic Mode A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.
Applied with high strength material providing high-quality external texture. Special design of follower makes sure no BB left after the final shot. Compatible with most AEG at the market.
Collapsible polymer stock suitable only for CYMA 077A AEG AK replicas. Offers a right-side folding, 5-position length of adjustability, and a rubber butt-pad with anti-slip surface. Weight: 410 g Material: polymer Color: black