The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 2.5kg
Price
Price
€0.00 - €160.00
Subcategories
There are 594 products.
Active filters
FS3 Multi-Mission Single Point / 2Point Sling Replica sling made from thick and strong nylon. It can be used as a Single Point sling or 2 Point Sling according to shooter"s actual needs and preferences. It can be done in no time with one hand. Hooks are equipped with innovative locking system - it is possible to lock them with one move. It will provide...
HM0399 Polymer Stock for 416 Replicas A light, adjustable stock made of polymer, compatible with any replica equipped with a HK416 / AR15 buffer tube. The stock features a thick, rubber recoil pad and tactical sling swivels.
Double rifle gun case have two main pockets, bigger one have 82 cm long and shorter one have 60 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 25 cm. Weight: 1000 g Material: 1000D polyester Camouflage: coyote Length mm:820 Width milimeters: 280
Airsoft High quality EOTech QD FTS, 3x magnification scope, Tactical design, Made by aluminum & rubber material. Full metal flip. Hybrid Sight.
Patch 2nd infantry division indian head Patch with text/picture
The dummy silencer has a left and a right thread with a diameter of 14mm. Inside there is a special foam.
Material: polar fleece Color: foliage
Delta ring set and handguard cap not included. M16A2 handguard in black color. It is same size as real handguard.
Holo 557 type sight - Aiming point has two illumination types: red and green.- Non- reflective hard-coat anodized matte black finish
A replica of HWS, the best for two eyes open shooting and when you need speed and accuracy. Guarantees faster target acquisition and gives the operator greater zone control. Fits all standard Picatinny rails. Illumination types: red and green.
Set of Future knee protection pads Made mostly of nylon, highly ergonomic elbow protection pads. The protection shells were made of durable plastic and ensure a high level of protection against joint injuries. Thanks to their specific cone shape the spread of the force of the impacts guarantees increases amortization. The shells are reinforced with the...
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
40 MM AIRSOFT DOT SIGHT. All versions has insensitivity settings and the illuminated dot has both windage and elevation adjustment. Lightweight and compact design, weatherproof, shockproof and fogproof.
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
FAST PJ Helmet only Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
Made entirely of durable nylon bag / carrying case, dedicated to carry 2 carbines or 1 machine gun.
Weight: 100 g Material: aluminum Length: 145 mm Diameter: 30 mm The silencer have 14mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel.
1.6 Steel Flash Hider A steel flash hider equipped with 14 mm CCW thread.
1.5X ZF-41 Scope with mount for Kar98 replicas Optical scope dedicated to the historical replica of the Kar98 rifle. The scope is made entirely of metal, with the exception of the covers for the adjustment knobs and the tightened viewfinder. The telescope has a dedicated assembly and a set of glass covers.
![Silencer 145X30mm [CYMA] Sound suppressor](https://airsoftguns.ie/16385-home_default/silencer-145x30mm-cyma-sound-suppressor.jpg)
