The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
ITEM FEATURES:
Made by high density nylon.
Tactical molle belt holster for handgun, pistol and revolver.
Right handed design.
Velcro strap and buckle snap made this holster fully adjustable.
Universal holster fit various pistol frame size.
Accommodate with one pistol.
Velcro flip magazine or flashlight pouch.
Able to attach to any molle webbing vest, bag or backpack...etc.
Can also attach to waist belt or vest belt.
Perfect for outdoor war game activities.
NOTE: Please check your pistol size to fit this holster
DETAILS:
Color - Matte black
Weight - 150g
Holster size - 200mm(H) x 100mm(W)
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
A.E.G spring 140 m/s [Guarder]Spring SP 140 [Guarder] with an uneven pitch AEG tuning.Both ends of the springs are polished.Compatible with AEG Facilities, except PSG-1.Equivalent to 140 Systema.Installation of the spring provides power outlet between 450 up to 480fps (muzzle velocity is dependent on other parts mounted in the interior of the gearbox)....
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
A set of three throwing knives from the spanish company Martinez Albainox.The knives are made of durable stainless steel.The knife blades are contoured and have one sharpened edge.The handle of the knife has partial notches under the fingers to improve the grip.There are also holes in the handle that improve the balance of the knife.The knife set is sold...
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Simply pour BB into the loader, align nozzle to magazine feed tube, then just push the pump. No more messy BB handling & no need to carry the fragile long BB loading rod around. Hold up to 400 Rounds of BB. Please note! Can come Clear or Tinted - depending of delivery!
Co2 version FULL METAL CONSTRUCTION Design for Gas Blow Back Pistol 24 Rounds Loading Capacity Suitable for KJ Works KP-01 E2 (P226)
Theta Optics™ Battle reflex sight is enclosed in a metal casing and powered by three AG13 batteries as well as allows to use a green or red dot during both day and night operations. The aimpoint can be smoothly regulated vertically and horizontally. It features several brightness options. Mounted on a standard 22mm RIS rail, the sight allows for rapid and...
Select Size. Those gloves are made of durable material, because of that can be used in difficult conditions. Designed for superior comfort, can be used for precise action without the need of taking them out. The layer of synthetic skin provides a better grip in any condition
- Dummy plastic Carabiner - It is easy to attach to molle belts. - NOT FOR CLIMBING !!!
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
1 LITRE HYDRATION RESERVOIR BLADDER - OLIVE- Hydration pack just for cold drinks.
- Full metal, adjustable - Fits 20mm weaver rails and comes with front fitting for WELL L96 sniper rifles - This bipod fits MB01, MB01/08, MB08
The universal holster is mounted on the MOLLE system is additionally equipped with a spare magazine pouch.
Standard Version of green gas WE M92 Airsoft Pistol, Full Metal Construction, Gas Blow Back Pistol with Semi-Automatic Shooting Mode, Extreme smooth slide cycling with clicks & clacks metal sound, 25+1 Rds High Loading Capacity Magazine.
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
![M4 CM.603 - BLACK [CYMA]...](https://airsoftguns.ie/15624-home_default/m4-cm603-black-cyma-airsoft-rifle.jpg)
