The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
FS3 Multi-Mission Single Point / 2Point Sling
Replica sling made from thick and strong nylon. It can be used as a Single Point sling or 2 Point Sling according to shooter"s actual needs and preferences. It can be done in no time with one hand.
Hooks are equipped with innovative locking system - it is possible to lock them with one move. It will provide protection against accidental unlocking and increase the stability of an attachment.
Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Tactical Lanyard - Olive Drab A tactical lanyard made of nylon with a length of 520 mm. Features a tear-away buckle that allows for a rapid detachment.
Replacement programming button needed for some GATE brand MOSFETs. 1 programming button Compatible with: MERF 3.2 and NanoHARD *Upgrading / repairing airsoft guns should only be done by skilled technicians. Airsoftguns.ie is not liable for any damages caused by the improper installation of the parts we sell.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Low-Cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better working, · during first usage, magazine SHOULD be loaded with few bb's and subsequently core out. After magazine...
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2100 mAh Length: 103 mm Width: 34 mm Accumulator voltage: 7,4 V Height: 16 mm NOTICE! Batteries are covered only by starting warranty.
Beanie 100% acrylic.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Goggles with a polycarbonate visor and a frame made of resistant TPU material. NOTE: Goggles provide protection from an impact that can be caused by airsoft bbs. Although they are tested, they are not unbreakable. The manufacturer or seller is not responsible for product damage incurred in connection with the use of games in the tactical/military/ASG. The...
Paracord made of 100% nylon with iron buckle Length: 20 cm.
KILO9 Professional 0,20g -1kg (5000rds) Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. Color: white Weight: 0,20g Manufacturer: KILO9
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
Case Qty: 6 pcs Weight: 1600 g Material: 600D polyester Length: 900 mm Width: 65 mm Camouflage: woodland Height: 340 mm
FS3 Multi-Mission Single Point / 2Point Sling
Replica sling made from thick and strong nylon. It can be used as a Single Point sling or 2 Point Sling according to shooter"s actual needs and preferences. It can be done in no time with one hand.
Hooks are equipped with innovative locking system - it is possible to lock them with one move. It will provide protection against accidental unlocking and increase the stability of an attachment.
