The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 2.5kg
Price
Price
€1.00 - €100.00
Subcategories
There are 554 products.
Active filters
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
Pouch has been made of high quality polymer. Pouch has been designed to hold most 7.62 magazines. Set include two fast pouches.
VAS type mount; The plastic made VAS type NVG system mount is designed to attach the system to the ACH/MICH/PASGT helmets. It allows a stable and sure attachment of the night vision system to the helmet. Made of: plastic material Color: black Number of mounting spots: 3 Designed for: the ACH / MICH / PASGT type helmets Manufacturer: FMA
Patch 3D PVC blood type B+ positive - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
Weight: 200 g Magazine model: low-cap Magazine capacity: 50 BBs Material: steel Color: black Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: * during first usage, magazine *MUST NOT* be fully loaded with bb`s, * before first usage, magazine *SHOULD* be oiled with silicon oil for better...
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
Magazine dedicated to the Lee Enfield SMLE No. 1 Mk III (S&T) rifle replica. Weight: 220 g Magazine model: low-cap Material: steel Color: black Magazine capacity BBs: 30
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
Magazine pouch can hold 7.62/.308 style magazines (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR) and 5.56/.223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
Weight: 215 g Length: 460mm Material: plastic Width: 85mm Hydration pack capacity: 2,5 l NOTE! Hydration pack just for cold drinks.
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
Replica of Knee and Elbow Pads used by US troops serving worldwide. High impact shatter resistant caps and soft foam covered by durable Nylon 1000D makes them good for ASG, paint ball, skating, installing floors or any kind of work or play where you need to protect your knees and elbows.Includes:* 2x Knee Pad* 2x Elbow Pad
Tactical cap A cap made from mix of polyester and cotton, granting it a good compromise between durability and breathability. A classic, comfortable design makes the cap an universal head cover, perfect in both everyday and airsoft use. The material used has rip-stop structure. This guarantees high resistance to mechanical damages. The size is universal –...
Mil-Spec Monkey Patch - GOODGUY (SWAT), Can attach to body armor, tactical vest, harness & any BDU with Velcro End, Grey hook velcro sewn on the back, Gear up your BDU attaching this graphic type patch with its Velcro Strap
Patch 3D PVC big nightmare smiley - Patch PVC with velcro at backside - shines at night (iluminascence)
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
NOTE! Presented magazine can be powered only by green gas. Weight: 245 g Magazine type: Green Gas Magazine model: low-cap Material: aluminum Color: black Length mm: 140 Magazine capacity BBs: 20
Ghillie suit special forces made of cotton and nylon. Complete suit including head.
Patch PVC with velcro
Replica of Knee and Elbow Pads used by US troops serving worldwide. High impact shatter resistant caps and soft foam covered by durable Nylon 1000D makes them good for ASG, paint ball, skating, installing floors or any kind of work or play where you need to protect your knees and elbows.Includes:* 2x Knee Pad* 2x Elbow Pad
