The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
Intended for use in hot weather conditions. Mid-depth cut works with variety of LE/Mil headgear systems.
Product:
- Four Velcro panels (at the front, at the top, and two in the back)
- Six vent holes
- One size fits all
- Dimensions of all velcro panels:
- FRONT: 90 x 50 mm
- TOP: length 60 x 55 mm
- REAR: length 45 x 40 mm
- PANEL ON ADJUSTMENT STRAP: length 75 x 25 mm
- Material: 60% Cotton, 40% Polyester
- Weight: 68g
CYMA 150rd Standard Magazine for AK AEG (C.71)
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
The grenade’s diameter is 40mm and it is made of metal. The green gas grenade is designed to be used with the grenade launcher having the inner diameter of 40mm. The grenade is powered by green-gas. It holds 96 BB pellets.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
The long-awaited, high-quality and high-precision Rockets BBs. The diameter is 5.95 mm (+/- 0.01 mm), and the differences in the weight of individual pellets does not exceed 0.01 g.
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
Color: white Weight: 0,12g Manufacturer: Rockets
DESCRIPTION: BDU jacket made of 65% polyester and 35% cotton WEIGHT (GR): 600 BRAND: Fostex
Made by high density nylon. Enhance the speed of magazine change. Keep the empty magazine for reloading later. Able to attached to any molle webbing vest, bag, duty belt or backpack. Color - MB
Forward grip for RIS rail, has a quick assembly system without tools. Weight: 90 g Color: black
Paracord made of 100% nylon with iron buckle Length: 20 cm.
Shells For Spring Powered Shotgun, 6 PC, 30rd's per shell Please note!!! THE SHELLS CAN BE ONLY ONE COLOR - RED
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
DESCRIPTION A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with L96, TM models, such as : WELL MB4401, 02, 03, 06, 07, 08, 09. Outer diameter -11,6mm, internal diameter-8,1mm. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must...
PLO scarf with print Made of 100% cotton
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
