The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 460 products.
Active filters
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
A replica of one of the most popular rifles in the world produced by a Chinese company, known for its reliability on the ASG market. Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings. The spring guide is reinforced (metal), polymer piston has metal teeth. A huge advantage is the silent piston and cylinder head...
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
Gearbox type V2 with reinforced construction. The front part has been strengthened, the most exposed to damage has been considerably thickened, and the place of the contact with the cylinder has been improved so as to evenly transfer the loads. It is prepared for mounting 8mm bearings. Mounting this gearbox to replicas of other manufacturers than J.G. ,...
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: T-CONNECTORAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for M4/M16 series Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
Designed for: the M16A1/ A2/ VN AUG+ type replicas Diameter: 6,01 mm Length: 509 mm Weight: 70 g Made of: stainless steel and aircraft aluminum Manufacturer: Modify
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight. The replica is powered by a 12 g CO2 capsule, installed directly in a magazine. The magazine itself is a two-row kind, which allows...
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
SHS M120 AEG Spring Material: Steel 110 m/s spring
6,03mm steel precision inner barrell - 590 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
![M4 CM.507 [CYMA]](https://airsoftguns.ie/20492-home_default/m4-cm507-cyma-.jpg)
