The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price.
The replica does not have a charger and a battery in the set.
|
400rd XL Size BB Speed Loader Clear or Tinted
€8.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€8.95 |
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price.
Parts used in mechanism of the replica:
* metal gearbox shell
* cylinder type 1
* directional piston head
* plastic piston
* reinforced steel slide bearings 8 mm
* steel gears set
* Hi-torque motor
Weight: 1960 g
Magazine model: ABS
Bearings type: steel sliding
Gearbox version: v.2
Muzzle velocity: ~ 328 fps
Accumulator type: cube
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Accumulator included in set: YES
Magazine capacity: 300 BBs
Material: aluminum, ABS, steel
Color: black
Length: 795/880 mm
Muzzle energy: ~1J
Length of internal barrel: 380 mm
Fire mode: auto, single
Set includes:
* replica with 1 month warranty
* 300rd Hi-Cap magazine
The replica does not have a charger and a battery in the set.
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
A replica of one of the most popular rifles in the world produced by a Chinese company, known for its reliability on the ASG market. Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings. The spring guide is reinforced (metal), polymer piston has metal teeth. A huge advantage is the silent piston and cylinder head...
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
AGM MP056B is an authentic replica of the German StG 44 (MP 44) automatic rifle, superbly crafted with a full-metal construction and real wood furniture, it is sure to impress both competitive airsoft players and reenactors.Primarily made of aluminum and steel, not only does it have an unparalleled build quality, but it is also highly reliable, durable,...
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal. The set does not...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price.
The replica does not have a charger and a battery in the set.
![HK416 FULL METAL LONG [BELL]](https://airsoftguns.ie/15698-home_default/hk416-full-metal-long-bell-.jpg)
![M4 CM.612 - Black [CYMA]...](https://airsoftguns.ie/14077-home_default/m4-cm612-black-cyma-airsoft-rifle.jpg)
![AK-74 CM.040 [CYMA] Full...](https://airsoftguns.ie/17625-home_default/ak-74-cm040-cyma-full-metal-steel-and-aluminium.jpg)
![M4 CM.007 Full Metal [CYMA]...](https://airsoftguns.ie/14678-home_default/m4-cm007-full-metal-cyma-ris-carbine-aeg-rifle.jpg)
![M4 CQB CM.517 - BLACK [CYMA]](https://airsoftguns.ie/12103-home_default/m4-cqb-cm517-black-cyma-.jpg)
