The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1kg
Price
Price
€0.00 - €165.00
Subcategories
There are 465 products.
Active filters
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
Purpose: WE Browning MK3 Capacity: 20 BB’s Weight: 260g Color: black Engine: Green Gas Manufacturer: WE
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
Guarder SP100 spring (M100), Airsoft AEG, Upgrade your AEG's fps to 320 to 340fps.
"KeyMod" slots on sides & bottom allow for mounting rail segments to attach tactical accessories such as vertical grip, laser sights, flashlights, sling mounts, and bipods.
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
25-round Green Gas metal magazine. Dedicated for WE-TECH M9/92FS series.
SHS Original AEG Motor for Gearbox Ver.3 (Short Type) FEATURES: SHS standard motor short type. SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for AK / G36 Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
It has a very wide menu, allowing selection of all the necessary parameters. It remembers the results of 25 shots, and for the correct readings, are responsible set of 14 sensors.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Made of: steel Weight: 80g Diameter: 6,03mm Length: 363mm Manufacturer: PPS Airsoft
Spartan Doctrine 14mm silencer adapter (CCW). Suitable for Tokyo Marui G36C Series Airsoft Rifle. Convert to 14mm counter-clockwise thread. Essential part for your Airsoft Rifle to adapt a compensator.
CYMA Aluminum Rail Handguard for RPK Airsoft AEG (C.92)- Aluminum / Steel Construction - Replace the original handguard and gas tube- Fit RPK Series Airsoft Electric GUN AEG Rifle
6,03 steel precision inner barrel - 370 mm Precision inner barrel with a length of a 370 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Weight: 130 g Magazine type: Green Gas Magazine model: low-cap Magazine capacity: 23 BBs Material: ABS Color: black Presented magazine can be powered only by green gas.
NOTE! Presented magazine can be powered only by green gas. Weight: 245 g Magazine type: Green Gas Magazine model: low-cap Material: aluminum Color: black Length mm: 140 Magazine capacity BBs: 20
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
Modular aluminum rail system for AK replicas. Thanks to the Key-Mod system, it provides the user with a variety of configurations for mounting accessories. Weight: 100 g Material: aluminum Color: black Length mm: 162 The rail system is compatible with most replicas from well-known manufacturers: - [FB2999] - [FB2879] - [FB2761] - [023] - [003A] - [005] -...
