The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 2.5kg
Price
Price
€1.00 - €165.00
Subcategories
There are 607 products.
Active filters
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft.
Patch PVC Zombie hunter - Patch PVC with velcro at backside - ARID color - (Size: approx. 2.75inch)
Weight: 500 g Material: polymer Color: tan Attention! Accessories shown in the last pictures are not part of the kit. NOTE! Max. head circumference: 60cm
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
Tornado Drop Leg Thigh Pistol RH Holster OD, Made by high density Nylon material. Universal holster suitable for most pistol frame. 1 flashlight pouch. Velcro strap and buckle snap make this holster fully adjustable.
Patch 3D PVC 2nd InfantryPatch PVC with velcro at backside
Beanie 100% acrylic.
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: black
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Tactical gloves are made of high-quality soft mesh microfiber fabric, which is breathable and soft, and there is an air hole on the fingers to effectively prevent the hands from being soaked by sweat. The material of the palm part is thickened and wear-resistant for increasing service life. Weight: 65 g Material: polyester, synthetic leather, spandex...
Guarder SP90 spring (M90), Airsoft AEG, Upgrade your AEG's fps to 290 to 300fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Patch 3D PVC blood type AB+ positive - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
Weight: 20 g Material: steel Length: 172 mm
Patch PVC with velcro
Magazine pouch can hold 7.62/.308 style magazines (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR) and 5.56/.223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
A vest made on nylon mesh. Features belts, three on each side, that are used for size adjustment. On the back, there are three 50 mm wide belts. The vest can be divided into two parts and has a zipper closure. On the right flap, there are three single pouches for STANAG magazines and a handy pocket with a hook and loop fastener for the attachment of...
Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment. It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts against damage. The...
