The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 460 products.
Active filters
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Cocking handle's spring for the M series
The plastic made hop-up chamber is made by the JG company and is designed for the AUG replicas. The plastic make preserves the parameters whenever the chamber is used in low-temperatures.
A long-awaited replica of ARMY ARMAMENT's double-stack 1911 pistol already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long-range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction.
A realistic replica of a select-fire (SEMI, AUTO) versions of the C96 pistol made by the Taiwanese WE-TECH company. The pistol used during World War II by the Nazi German armed forces. Solid full metal construction with a functional blowback system that further increases the realism. Frame, front sight, slide, slide stop, barrel, rear sight, safety,...
DESCRIPTION: Good Wire is essential for connecting the Battery to the Gearbox Constructed of Large Capacity Silver Plated Copper Wire. Perfectly welled together for maximum current flow.
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
Weight: 170 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Accumulator voltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
The WE09-1 is a replica of the iconic AK rifle, crafted and manufactured by the renowned Russian firearms manufacturer. It represents a modern adaptation within the lineage of AK rifles. This version is designed with a shorter barrel length, tailored specifically for VDV troops. Engineered to fire the 5.45×39mm cartridge, this Russian assault rifle...
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
This steel spring guide bearing for V2 gearboxes is a great alternative if you are is damaged or you want to tune up the replica. It will provide proper spring operations. Warning! This spring guide does not match CYMA replicas in which the V2 gearbox is installed. All Cymy replicas are equipped with a V3 spring guide, both gearbox version V3 and V2....
Microprocessor charger for small capacity batteries, for AEP pistol replicas. The charger is plugged into a USB, so we can charge our battery using many devices or even a power bank. After the battery is charged, the loading process will automatically stop. Thus, the battery is protected against damage. The charging process is signaled by LEDs. NOTICE!...
Low-resistance cable length of 2 m [IPower]
Weight: 140 g Length: 363 mm Internal diameter: 6,02 mm
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
![M4 CM.068C Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16222-home_default/m4-cm068c-full-metal-cyma-key-mod-aeg-rifle.jpg)
