Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The WE09-1 is a replica of the iconic AK rifle, crafted and manufactured by the renowned Russian firearms manufacturer. It represents a modern adaptation within the lineage of AK rifles. This version is designed with a shorter barrel length, tailored specifically for VDV troops. Engineered to fire the 5.45×39mm cartridge, this Russian assault rifle embodies the fifth generation of its kind.
The WE09-1 replica has undergone several external upgrades to improve its functionality and user experience. Firstly, the bolt cover now features a 22mm Picatinny rail for attaching [optics] red-dot-sights), along with a redesigned rear sight for enhanced accuracy.
The WE09-1 is a replica of the iconic AK rifle, crafted and manufactured by the renowned Russian firearms manufacturer. It represents a modern adaptation within the lineage of AK rifles. This version is designed with a shorter barrel length, tailored specifically for VDV troops. Engineered to fire the 5.45×39mm cartridge, this Russian assault rifle embodies the fifth generation of its kind.
The WE09-1 replica has undergone several external upgrades to improve its functionality and user experience. Firstly, the bolt cover now features a 22mm Picatinny rail for attaching [optics] red-dot-sights), along with a redesigned rear sight for enhanced accuracy. The basic stock has been replaced with a Russian polymer stock that offers folding capability to the left side, six adjustable length positions, a cheek riser, and compatibility with [QD-type tactical slings]. The handguard has been redesigned for better ergonomics and features a Picatinny rail system for additional accessories.
Furthermore, this airsoft replica boasts an ambidextrous safety/fire selector, allowing for easy operation from either side of the receiver. Additionally, there's an added cover that automatically closes the rear part of the bolt chamber when the selector is in the "safe" position, enhancing safety.
Lastly, the pistol grip has been upgraded with a new ergonomic design integrated with the trigger guard, providing a more secure grip during shooting. Notably, this AK variant also includes an ergonomic ambidextrous release button magazine, facilitating quick and intuitive reloading.
Main elements such as the receiver, receiver top cover, trigger guard, magazine latch, stock, magazine, and handguard are made of durable nylon construction. Other parts like the outer barrel, flash hider, gas block, fire selector, charging handle, stock collapse system, rear sight, and trigger are made from high-quality aluminum and steel.
The WE09-1 replica features a dedicated V3 Gearbox, designed to accommodate a dual selector and boasting quick spring exchange functionality. Notably, this gearbox system can be accessed even after folding the stock, ensuring ease of maintenance. Inside the reinforced gearbox, you'll find 18:1 steel gears mounted on 8mm slide bearings, paired with a full-steel tooth piston and a type 1 cylinder for durability and reliability.
Furthermore, this rifle is equipped with an ETU-type Optical Mosfet, offering programmable firing modes such as BINARY Mode or 3-round BURST. The AK also comes with a dedicated rotary hop-up chamber compatible with standard AEG buckings, coupled with a 6.03mm inner barrel measuring 360mm in length for enhanced precision and range.
Programming instructions for the mosfet:
Enter programming mode - Hold the trigger in the single fire mode position for about 6 seconds. The replica will enter programming mode.
Folder selection:
We have 3 folders at our disposal, marked with the number of sound signals, respectively:
Folder 1: beep
Folder 2: beep beep
Folder 3: beep beep beep
Selecting a program in a folder - Hold the trigger after hearing the sound of the specific folder to enter its settings.
Description of folder functions:
Folder 1: Fire Mode Settings - Selection is made by holding the trigger. After making the selection, exit the programming mode automatically.
Program 1: Semi
Program 2: Binary
Folder 2: Fire Mode Settings - Selection is made by holding the trigger. After making the selection, exit the programming mode automatically.
Program 1: Full Auto
Program 2: Burst
Folder 3: Pre-Cocking Setting - Selection is made by holding the trigger. After making the selection, exit the programming mode automatically.
Program 1: Pre-Cocking OFF
Program 2: Pre-Cocking position 1
Program 3, 4, 5: Positions are not adapted for DSG gears. It is recommended to limit the programming mode to the first two programs (1,2).
The kit includes:
- Airsoft AK12K rifle mosfet replica
- Variable magazine 180 BBs
Barrel thread type: counter-clockwise
Weight: 2570 g
Magazine material: nylon
Bearings type: steel sliding
Gearbox version: dedicated
Bearings diameter: 8 mm
Accumulator connector type: T-connerctor
Battery included in set: NO
Material: aluminum, polymer, steel
Color: black
Fire type: auto, single
Serial number: YES
Length mm: 800
Inner barrel length mm: 360
Muzzle energy J: 1
Magazine capacity BBs: 180
Muzzle velocity fps: max 328
Inner barrel diameter mm: 6.03
Muzzle BB velocity Med: max 328
Barrel thread diameter millimeters: 14
Gun Model: AK12
NOTE! The WE09-1 has a unique serial number.
Every replica pass initial check-up. It's being checked and overshot on XCORTE
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
CM040D replica The replica is made of steel and high-quality ABS. Made of steel are silencer , dummy pipe gas, body with gunbody cover, fire selector and other minor components of metal instead of steel applications, provides much greater resistance to a large variety of damage. The magazine is made of ABS (hicap) and pistol and front grip. The hop up...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
This replica of M16A1 features a special triangular shaped handguard, pistol grip, fixed stock, three prong flash hider, forward assist, fixed carry handle upper with rear iron sight making it an authentic looking M16A1 used in the Vietnam War. Receivers, carry handle with rear sight, flash hider, trigger guard, safety lever, front sight, forward assist,...
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
Battery with charger inc.. Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body,...