The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
AWP Monster 77 is a hop-up bucking designed for L96series replicas - MB01,MB05,MB06.
Its secret lies in the innovative shape of the element that wind the balls - DIAMOND. It is thanks to this unique shape that the range of the shots is significantly improved.
Works great in sniper rifles.
Thanks to the larger and wider surface of the ball style, it provides optimal curl - perfect for heavy balls.
Before buying, make sure that the hop-up rubber will fit your barrel.
It fits the factory hop-up chamber in the Cyma 702 replica, but then the barrel needs to be replaced with the L96.
Weight: 3 g
Material: silicon rubber
Color: black
Quantity in package: 1 pcs
Extremely durable cylinder set for type VSR10 replicas such as BAR10, CYMA 701, Well MB02 / MB03, VSR11. The cylinder is made of steel and fully Teflon coated to minimize the piston friction. The cylinder head with the nozzle and the cylinder end are screwed in and made of stainless steel. Thanks to that, they can work even with strong springs. Weight:...
Adapter for Airsoft Sniper Rifle - 002 - AGM, L96, STEYR Adapter allows to mount the silencer to the sniper rifle. It have 14 mm counterclockwise thread.
Weight: 170 g Material: metal
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
Adapter allows to mount the silencer to the sniper rifle CM.701, CM.702, CM.700, TM VSR-10, JG BAR-10. It have 14 mm counterclockwise thread.
UPGRADE SET FOR VSR10 - MB02/03 SERIES [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearingCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
Trigger Assembly for VSR10
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
The elements are made of stainless steel, thanks to which it ensures trouble-free use. Fits replicas equipped with a metal trigger unit. Fits models:Well L96 / MB01 / 04/05/08/14 Weight: 20 g Material: stainless steel Quantity in package: 1 pcs
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Dedicated to replicas in the VSR 10. Has been carefully made of chrome plated brass. Precision inner barrels allow for better compression, improved accuracy, and in a few cases increase muzzle velocity. Although precision barrels often require more maintenance and...
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
SHS 2nd Sear for Marui L96 AWS Sniper (Steel)
Adapter for Airsoft Sniper Rifle WELL 96, MB01/MB05, Adapter allows to mount the silencer to the sniper rifle. It have 14 mm counterclockwise thread.
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Has been carefully made of chrome plated brass. Fits all replicas in the type 96 standard such as Well MB01/06/08. When mounting this barrel in CM.702 / 706 replicas, it is necessary to replace the hop-up bucking with a 96 type bucking. Precision inner barrels allow...
AWP Monster 77 is a hop-up bucking designed for L96series replicas - MB01,MB05,MB06.
Its secret lies in the innovative shape of the element that wind the balls - DIAMOND. It is thanks to this unique shape that the range of the shots is significantly improved.
Works great in sniper rifles.
Thanks to the larger and wider surface of the ball style, it provides optimal curl - perfect for heavy balls.
Before buying, make sure that the hop-up rubber will fit your barrel.
It fits the factory hop-up chamber in the Cyma 702 replica, but then the barrel needs to be replaced with the L96.
Weight: 3 g
Material: silicon rubber
Color: black
Quantity in package: 1 pcs
