The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 1256 products.
Spare hydration bladder Capacity: 3 L
Designed for: the M16A1/ A2/ VN AUG+ type replicas Diameter: 6,01 mm Length: 509 mm Weight: 70 g Made of: stainless steel and aircraft aluminum Manufacturer: Modify
Material: polar fleeceCamouflage: black
The pin is designed for the body of the G36 type replicas.
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
DESCRIPTION Made of aluminum double seal cylinder head for M4 replica.Precisely machined on CNC, guarantees high compression.CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled.
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Purpose: M4 Replicas Material: Aluminium Length: 20.90mm Manufacturer: Cyma
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
Replacement programming button needed for some GATE brand MOSFETs. 1 programming button Compatible with: MERF 3.2 and NanoHARD *Upgrading / repairing airsoft guns should only be done by skilled technicians. Airsoftguns.ie is not liable for any damages caused by the improper installation of the parts we sell.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
Gearbox type V2 with reinforced construction. The front part has been strengthened, the most exposed to damage has been considerably thickened, and the place of the contact with the cylinder has been improved so as to evenly transfer the loads. It is prepared for mounting 8mm bearings. Mounting this gearbox to replicas of other manufacturers than J.G. ,...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Complet spring set for gearbox G36. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5g Material: steel
The baseball cap has 3D embroidered text and is adjustable on the backside. The baseball cap has a perfect fit and is very comfortable. Fabric: 100% Cotton Size: One size fits all (adjustable on the back) US Army Cap. Premium cap with the current United States Army logo Nice cap for the collection or for daily use.
Complete, assembled gearbox with the engine, trigger switch and wiring for P90 replicas. Dedicated to 60 cyma replicas. CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be cancelled. Weight: 730 g
The HFC-173 pistol replica is mostly made of aluminum and metal - alloy. The gun is equipped with an extraordinary "overlay" made of polymer. It gives a unique character, improves the grip and allows the assembly a laser or flashlight. This replica has been reproduced on a 1: 1 scale, the green gas is powered. Just like rial gun the slide moves with each...
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
Set of 2 mounts for ear protection; Set of 2 mounts adapted for attaching to helmets equipped with mounts for tactical gear. It enables us to use hearing protection without wearing a classic headband under the helmet, which greatly improves the user's comMaterial: polymer + metal Weight: 50g Color: black Manufacturer: Ultimate Tactical The set also...
Weight: 75 g Material: steel Length: 66 mm The silencer have 14 mm counterclockwise thread.
![HK416 FULL METAL LONG [BELL]](https://airsoftguns.ie/15698-home_default/hk416-full-metal-long-bell-.jpg)
![Dummy Compensator for AR-15/M16/M4 [KUBLAI]](https://airsoftguns.ie/16545-home_default/dummy-compensator-for-ar-15m16m4-kublai-.jpg)