The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 1255 products.
M1918 BAR replica magazine of S&T company, which can be found on our website. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: before first usage, magazine SHOULD be oiled with silicon oil for better working, REMEMBER, If magazine is stored, it MUST be empty, REMEMBER to regularly oil the magazine with...
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Full Metal Constructed Airsoft Aimpoint Micro T-1 1X24 dark earth Red & Green Dot Scope Type Illuminated Sight , Adjustable Red / Green Illuminated Dot, 5 Levels Dot Brightness Control on each illuminate color, Include See Through design
G&P Cartridge Custom Parts -- 4mm Chrome Steel Ball Bearings 4pcs -- For 40mm Airsoft Grenade Launcher Cartridge
GUARDER Steel Spring Guide with Ball Bearing -- For Marui Gearbox Ver II Airsoft AEG --
Tornado Drop Leg Thigh Pistol RH Holster, Made by high density Nylon material. Able to attach to duty belt or fasten to the leg. Universal holster suitable for most pistol frame. 1 flashlight pouch. Velcro strap and buckle snap.
US G.I. style whistle with lanyard. Plastic casing.
100: 200 High Torque reinforced gear set The set of reinforced gears that were made of steel. Gears are adapted to power tuning. The whole set is compatible with V2 and V3 gearboxes. You can safely use a battery with increased current efficiency (models 10.8V and higher) with gearboxes equipped with this set of gears. Recommended springs: M150-M180.
Delta ring set and handguard cap not included. M16A2 handguard in black color. It is same size as real handguard.
20 round standard type magazine for the WE Browning Hi-Power M1935 airsoft gas blowback pistol. This magazine will work fine in both the silver and black versions
5KU Type 0 Aluminum Compensator for Marui Hi-Capa 5.1 (2-Tone)-- Aluminum Construction -- For Tokyo Marui Hi Capa 5.1 Series Airsoft Pistol-- 14mm Clockwise CW (Positive) Thread-- 2 Tone (Silver and Black) Color
Top Quality!!!. Industrial Army Paint - Fluor Red-Orange - 400 ml Spray Can Spray fluor paint Quick dry PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
AIP High Speed AEG Motor HS-50000, (Medium Type) Medium type for PSG1 / SIG AEG series (PSG-1 / SG550 / SG551). Custom motor tunes up your Airsoft AEG with low price & performance. High speed motor bring your AEG to next level. Note: Self-assembly is required, consult expertise if needed.
VAS type mount; The plastic made VAS type NVG system mount is designed to attach the system to the ACH/MICH/PASGT helmets. It allows a stable and sure attachment of the night vision system to the helmet. Made of: plastic material Color: black Number of mounting spots: 3 Designed for: the ACH / MICH / PASGT type helmets Manufacturer: FMA
- Made by Element MOE Rifle Length Handguard for M4 / M16 (Tan) - weight: 295g- Color: TAN- Material:Polymer
Mil-Tec - Personal camo net Camoflage: Digital Woodland Size 190 x 90 cm material: Made of interwoven fibers, consisting of 65% polyester and 35% cotton.
Patch 3D PVC blood type B+ positive - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
Patch God judge our enemies - Size : 75mm
Airsoft Barrel Nut Wrench - Model: EX 331 - Weight: 95g - Gross Weight:110g - Made by Element - For DD Lite/RIS II M4A1/MK18/Omega X Series/PWS Diablo Rail/MK110/MK112/MK114/MK116
Patch having IFF/IR identifier operating in infrared and visible light, is used for rapid identifica - Inscription "Poland" in Persian language.- velcro
