The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Material: polar fleece
Camouflage: black
Warm and comfortable Fleece Beanie Hat with good thermal insulation protects the head from the wind and cold. Cap is flexible and adheres well to the head, and at same time is soft and lightweight (30 g). It can be worn under a helmet. It has Velcro on the front with dimensions of 95 x 75 mm which is used to attach all kinds of emblems, signs or patches.
Weight: 105 g Material: brass Length: 454 mm Internal diameter: 6,03 mm
The SC-02 rifle airsoft gun is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of metal – of CNC machined aluminum to be precise. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the...
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
Semi- and full-automatic electric assault rifle – G36C Airsoft AEG
CAUTION! This unit suitable for Li-Po battery only. Specyfication: Charge current: 1.6 A for 3 cell, 2 A for 2 cell Balance current: 200mA for each cell Displey: 3x Bicolor LED Max. Charging Current: 3x 1600mA Size: 100mm * 60mm * 35mm
KJW KP-09 CZ75 GBB Airsoft Pistol (CO2 Version)-- Semi-Automatic Airsoft Gas Blow Back System-- Come With 24 Rounds Loading Capacity CO2 Gas Power Magazine-- Full Metal Slide and Frame
CM.128 is a selective-fire (semi-auto) electric non-blowback pistol. Fire-control selector switch in the form of the Safety Lever. Frame and slide made of polymer. Pistol featured with a hop up system.
Shooting target with gel BB trap, designed for ASG replicasTechnical data:- Target size: 150 x 150 mm- Weight: 300 g
Switch V.2 NB0027 A basic replacement of the trigger block - this piece consists of just the sliding contact & the trigger contact block; there is no wiring included. This is only for V2 gearboxes e.g. MP5, M4, M16 etc.
LiPo 7.4V 1200 mAh 25/50C Battery Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited...
The baseball cap has 3D embroidered text and is adjustable on the backside. The baseball cap has a perfect fit and is very comfortable. Fabric: 100% Cotton Size: One size fits all (adjustable on the back) US Army Cap. Premium cap with the current United States Army logo Nice cap for the collection or for daily use.
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Weight: 175 g Material: ABS Color: olive Protective visor: plexiglass Color of glasses: yellow, transparent, tinted
Speed loader for 150 BB s is ideal for low and midcap magazines.
M9A1 replica is a reproduction of a popular Italian pistol. Replica was made from polymer and metal. It"s characterized by a nice weight - 1kg! because it"s almost full metal -skeleton, slide, magazine and barrel were made from metal. Only grip covers were made from polymer. Please note!!! Gun came without markings / serial number!!!
Magpul style ASAP Ambidextrous Sling Attachment Point for airsoft allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation
Material: polar fleece
Camouflage: black
![CYMA HI-CAPA 5.1CM.128 [CYMA]](https://airsoftguns.ie/11579-home_default/cyma-hi-capa-51cm128-cyma-.jpg)
