CO2 12G CAPSULE

Reference: MOS-35-000766, 14798, CO2-12M

CO2 12G CAPSULE

Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
€1.00
More CO2 12G CAPSULE
In stock
MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Reference: VB1501000

MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...
€16.95
More MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V
In stock
Suitable for precision barrels, BIODEGRADABLE  AIRSOFT BB

Reference: ROC-16-011618

0,23G BIO PRECISION BB Green - 4350RD

Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels Rockets Professional BIO 0,23g BBs. Long-awaited, high quality, precision Rockets BBs. Thanks to a special manufacturing process, Rockets are characteristic for their very tight cone of...
€12.95
More 0,23G BIO PRECISION BB Green - 4350RD
In stock
All best sellers
  • Banner

    Banner left 1
Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine

Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine

ACR-01-044930

Arcturus LWT MK-II CQB 10" 

The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.

€209.95
Tax included
Quantity

Description

Arcturus LWT MK-II CQB 10" AEG SPORT SE™ airsoft Carbine

The airsoft carbine from Arcturus model LWTMK-II CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, the dummy slide were made from steel . At the same time, the manipulators (bolt-catch, selector, magazine catch), reloading levers and the stock guide were made from aluminium .

PA66 nylon is used for the 8.5" long M-LOK/RIS compatible barrel and handguard. The RIS rails are also nylon: both on the handguard and on the body. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock that accommodates the battery and folding sights.

The replica is lightweight, well-fitted and balanced, its interior provides very good performance in its factory configuration and a good base for tuning.

Inside the replica we find, among others:

- CNC steel cylinder

- Gearbox V2 with quick-change spring system

- Polymer spring guide

- Reinforced Gearbox front

- Polymer nozzle

- 23T motor (ferrite)

- 18:1 gears

- Hop-up rotary unit

- SE optical control system

The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control unit.

Functions of the SE ETU optical system:

- Pre-Cocking (2 stages)

- Active Break (2 stages)

- Progressive trigger

- Programmable fire modes

- Binary trigger with Ramping

- Low Battery Protection

- Electronic fuse

Battery included; No

Blow Back; No

Colour; Black/Tan

Product length [cm]; 85.50

Product weight [g]; 2150

Power supply; Electric

Muzzle velocity [FPS]; ~328

Fire mode; Full-auto

Adjusted burst; Semi-auto

Gearbox version; Gearbox v2

Package include:

Cleaning rod

Hi-Cap Magazine

Patch

Replica

Allen key

Iron sights

Small Tamyia - Deans adapter

Vertical Grip

Package exclude:

The set does not include the battery nor charger

Product Details
ACR-01-044930
4 other products in the same category:
Out-of-Stock M4 AEG WITH KEYMOD CM.515 Tan [CYMA] M4 AEG WITH KEYMOD CM.515 Tan [CYMA]

Reference: FB3460

Brand: CYMA

M4 AEG WITH KEYMOD CM.515 Tan [CYMA]

Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
€159.95
More M4 AEG WITH KEYMOD CM.515 Tan [CYMA]
Out-of-Stock
Out-of-Stock M16A1 Mosfet Full metal Vietnam (CM.009c) Cyma M16A1 Mosfet Full metal Vietnam (CM.009c) Cyma

Reference: CYM-01-027284

Brand: CYMA

M16A1 Mosfet Full metal Vietnam (CM.009c) Cyma

A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
€259.95
More M16A1 Mosfet Full metal Vietnam (CM.009c) Cyma
Out-of-Stock
JG AEG Steyr AUG A3, Airsoft rifle JG0447A JG AEG Steyr AUG A3, Airsoft rifle JG0447A

Reference: 0447A

Brand: Jing Gong (JG)

JG AEG Steyr AUG A3, Airsoft rifle JG0447A

0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
€259.95
More JG AEG Steyr AUG A3, Airsoft rifle JG0447A
In stock
Out-of-Stock Thompson M1A1 Military CM.033 [CYMA] Thompson M1A1 Military CM.033 [CYMA]

Reference: CYM-01-000119, FB2155

Brand: CYMA

Thompson M1A1 Military CM.033 [CYMA]

CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal. The set does not...
€219.95
More Thompson M1A1 Military CM.033 [CYMA]
Out-of-Stock

Follow us on Facebook