CO2 12G CAPSULE

Reference: MOS-35-000766, 14798, CO2-12M

CO2 12G CAPSULE

Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
€1.00
More CO2 12G CAPSULE
In stock
Suitable for precision barrels, BIODEGRADABLE  AIRSOFT BB

Reference: ROC-16-011618

0,23G BIO PRECISION BB Green - 4350RD

Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels Rockets Professional BIO 0,23g BBs. Long-awaited, high quality, precision Rockets BBs. Thanks to a special manufacturing process, Rockets are characteristic for their very tight cone of...
€12.95
More 0,23G BIO PRECISION BB Green - 4350RD
In stock
Out-of-Stock MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Reference: VB1501000

MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...
€16.95
More MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V
Out-of-Stock
All best sellers
  • Banner

    Banner left 1
Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black
  • Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black

Arcturus LWT MK-I CQB Carbine 10" AEG SPORT SE™ Black

ACR-01-044925

Arcturus LWT MK-I CQB 10" 

The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.

€189.95
Tax included
Quantity

Description

Description

Arcturus LWT MK-I CQB 10" AEG SPORT SE™ airsoft Carbine

The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.

The replica is lightweight, well-fitted and balanced, its interior provides very good performance in its factory configuration and a good base for tuning.

Inside the replica we will find, among others:

- Steel cylinder

- Gearbox V2 with quick-change spring system

- Polymer spring guide

- Reinforced Gearbox front

- Polymer nozzle

- 23T motor (ferrite)

- 18:1 gears

- Hop-up rotary unit

- SE optical control system

The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control unit.

Functions of the SE ETU optical system:

- Pre-Cocking (2 stages)

- Active Break (2 stages)

- Progressive trigger

- Programmable fire modes

- Binary trigger with Ramping

- Low Battery Protection

- Electronic fuse

Battery included; No

Blow Back; No

Colour; Black

Product length [cm]; 82

Product weight [g]; 2115

Power supply; Electric

Muzzle velocity [FPS]; ~328

Fire mode; Full-auto

Adjusted burst; Semi-auto

Gearbox version; Gearbox v2

Package include:

Cleaning rod

Hi-Cap Magazine

Patch

Replica

Allen key

Iron sights

Small Tamyia - Deans adapter

Package exclude:

The set does not include the battery nor charger

Product Details
ACR-01-044925
4 other products in the same category:
JG AEG Steyr AUG A3, Airsoft rifle JG0447A JG AEG Steyr AUG A3, Airsoft rifle JG0447A

Reference: 0447A

Brand: Jing Gong (JG)

JG AEG Steyr AUG A3, Airsoft rifle JG0447A

0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
€259.95
More JG AEG Steyr AUG A3, Airsoft rifle JG0447A
In stock
M4 CM.612 - Black [CYMA] Airsoft rifle M4 CM.612 - Black [CYMA] Airsoft rifle

Reference: FB3561, CYM-01-020853

M4 CM.612 - Black [CYMA] Airsoft rifle

Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
€185.95
More M4 CM.612 - Black [CYMA] Airsoft rifle
In stock
Out-of-Stock JG AEG Steyr AUG A2, Airsoft rifle JG0448A JG AEG Steyr AUG A2, Airsoft rifle JG0448A

Reference: JGW-01-000090, 0448A

Brand: Jing Gong (JG)

JG AEG Steyr AUG A2, Airsoft rifle JG0448A

The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
€199.95
More JG AEG Steyr AUG A2, Airsoft rifle JG0448A
Out-of-Stock
E&L KALASHNIKOV AKMS FULL STILL+WOOD (Mosfet Version) E&L KALASHNIKOV AKMS FULL STILL+WOOD (Mosfet Version)

Reference: EIL-01-033364

E&L KALASHNIKOV AKMS FULL STILL+WOOD (Mosfet Version)

The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
€329.95
More E&L KALASHNIKOV AKMS FULL STILL+WOOD (Mosfet Version)
In stock

Follow us on Facebook