The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
UPGRADE SET FOR VSR10 - MB02/03 SERIES [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearingCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
6,03 steel precision inner barrel - 300 mm Precision inner barrel with a length of a 300 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Trigger Assembly for VSR10
Description Airsoft Maintenance Kit The WE Europe Airsoft Maintenance Kit is a must have Kit for any Airsoft enthusiast. This kit includes everything an airsofter would need to keep their GBB & AEG weapons in the best condition meaning no compromising on performance. The Kit Includes: - Plastic Lubricant Oil (60ml)- Oil Remover (60ml)- Pump...
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
SHS Original AEG Motor for Gearbox Ver.3 (Short Type) FEATURES: SHS standard motor short type. SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for AK / G36 Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
DESCRIPTION A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with L96, TM models, such as : WELL MB4401, 02, 03, 06, 07, 08, 09. Outer diameter -11,6mm, internal diameter-8,1mm. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must...
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
Teeth are made with high precision providing faultless work of gearbox mechanism. it`s great for extreme rate of fire modifications. It`s designed for v.2 and v3 gearbox.
A.E.G spring 140 m/s [Guarder]Spring SP 140 [Guarder] with an uneven pitch AEG tuning.Both ends of the springs are polished.Compatible with AEG Facilities, except PSG-1.Equivalent to 140 Systema.Installation of the spring provides power outlet between 450 up to 480fps (muzzle velocity is dependent on other parts mounted in the interior of the gearbox)....
Weight: 20 g Material: steel Length: 172 mm
Steel 16:1 gears set - high speed Weight: 75 g Material: steel
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
Guarder SP100 spring (M100), Airsoft AEG, Upgrade your AEG's fps to 320 to 340fps.
Spring SP 110 [Guarder] with an uneven pitch AEG tuning.Both are polished face.Compatible with AEG Facilities, except PSG-1.Equivalent to 110 Systema.
Made of: brass Weight: 50g Diameter: 6,03mm Length: 229mm Manufacturer: PPS Airsoft, SHS
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
