The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Trigger switch for gear box V2.This high-quality contact cube is the ideal replacement for any damaged V2 trigger switch. It is made of high-temperature resistant polymers and copper with excellent electric conductive properties.This trigger switch ia made of extremely durable polycarbonate.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
Trigger Assembly for VSR10
The Exhaust magazine valve dedicated to APS ACP Dual Power replicas, such as: * Spyder-C * Scorpion * Dragonfly
High-quality polymer tappet plate. It is the ideal solution if the tappet plate in your replica is damaged or worn out. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
High-quality tappet plate for V2 gearbox. This material can withstand much more than plastic or ABS. It is flexible and resistant to impact. The installation of this component ensures reliable operation of the switch, the type of fire. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember...
King Arms Tappet Plate for M14 AEG Gear Box v.7, high-quality part which provides high-performance and extra durability. Made from high-strength ABS plastic
All the components to make a small Tamiya type plug.
Product Code: NMOP003 Product Brand: Systema Replace Original Motor Spring for Marui Airsoft AEG SUITABLE FOR SYSTEMA MOTOR ONLY
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
SHS Super Shooter Airsoft Electric Gun Upgrade Parts Series. Replace Marui's Original Gears with this upgrade High Precision Torque Up Gear. CNC Steel Construction. Drive ratio: 32:1. Suitable for Airsoft AEG models with Version 2 & 3 Gearbox.
Aluminium CNC Piston Head A high quality, metal, reinforced piston head - used mainly in upgrades.
Weight: 5 g Material: steel code BD1077
Precisely made, steel, CUT-OFF lever dedicated to V2 - M4 type gearboxes. The installation of this component ensures reliable operation of the gearbox. CAUTION!If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled. Weight: 5 g Material: steel Package quantity: 1 pcs.
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Teeth are made with high precision providing faultless work of gearbox mechanism. it`s great for rate of fire modifications. It`s designed for v.2 and v.3 gearbox. Mechanism works well on not harder spring than 130 m/s.
Steel 16:1 gears set - high speed Weight: 75 g Material: steel
![TAPPET PLATE V3 [POINT]](https://airsoftguns.ie/17908-home_default/tappet-plate-v3-point-.jpg)
