The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 2kg
Price
Price
€2.00 - €100.00
Subcategories
There are 135 products.
Active filters
Set of 2 mounts for ear protection; Set of 2 mounts adapted for attaching to helmets equipped with mounts for tactical gear. It enables us to use hearing protection without wearing a classic headband under the helmet, which greatly improves the user's comMaterial: polymer + metal Weight: 50g Color: black Manufacturer: Ultimate Tactical The set also...
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
Patch PVD with velcro at backsideDimension: 5 X 2,5 cm
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Annex MI-3 is a light mask made of polyethylene by a process of injection molding. This provides high elasticity and resistance to damage. The mask features a lens fast change function that allows adapting the mask to current weather conditions without having to possess a separate mask. The visor is a polycarbonate construction with two layers, covered...
Universal airsoft holster suitable for most pistol frame. Component pouches for magazine, flashlight or scope storing. All pouches and holster are removable and position can be changed.
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Knife foldable under Smith&Wesson license. Thanks to its small size, it is perfect for everyday use. The 8Cr13MoV steel blade, covered with black oxide, is opened with a double sided thumb stud or with a flipper. Thin Clip Point blade cuts perfectly. It is locked with the liner lock. The handle is made of durable nylon additionally reinforced with...
Very well made holster designed for pistol replicas. It is designed for safe and easy pistol handling. After pistol is locked up trigger is fully hidden so there is no possibility to fire. The safety lock gives possibility to single-motion draw and greater protection against attempted weapon takeaways. Holster is designed for right handed users. Weight:...
CHEST RIGG Plenty of pouches for gears, magazines & equipments Fast release buckle for easy release when needed. Material: nylon 600 D Making this gear more resistant to the usual wear and tear
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet. Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head. Characteristics: - Retains its shape, flexibility...
Simple Plate Carrier: Minimalist Protection, Maximum Mobility Simple Plate Carrier is an innovative solution for law enforcement, military and private security operators who focus on minimalism, mobility, reliability and protection. Designed for situations where every gram of equipment matters, this plate carrier offers incredible lightness without...
Patch 3D PVC WHO Dares WinsPatch PVC with velcro at backside
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch. The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo. Stock up on this throwing knife set and limit your time walking back and forth to your target!Technical data:- Steel: 2Cr13- Rockwell hardness: 50-53- Overall length: 237 mm-...
Weight: 175 g Material: ABS Color: OD Protective visor: plexiglass Color of glasses: yellow, transparent, tinted
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
LiPo 7.4V 1200 mAh 25/50C Battery Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited...
