The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0.1kg - 9kg
Price
Price
€5.00 - €600.00
Subcategories
There are 115 products.
Active filters
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy . Scope and bipod NOT INCLUDED. Please Choice separately from list below
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
Standard Version of green gas WE M92 Airsoft Pistol, Full Metal Construction, Gas Blow Back Pistol with Semi-Automatic Shooting Mode, Extreme smooth slide cycling with clicks & clacks metal sound, 25+1 Rds High Loading Capacity Magazine.
Introducing a robust reproduction of the Submachine Gun MK5 by [S&T], a formidable counterpart to the renowned Sten, solidifying its status as an iconic weapon in the British armed forces. Constructed from stamped steel, this firearm underwent rigorous trials as a potential successor to the Sten in early 1944 and swiftly earned its place among...
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
KP-05 [KJW] (HI-CAPA) is made from high quality aluminum. The grip in combination with very good chosen weight gives his operator feeling like holding a real gun. Replica can be powered by green gas or CO2, it`s depend which magazine type we use.
28 rounds capacity double-stack magazine with a base pad for fast, smooth, positive reload. NOTE! Magazine dedicated to the R5XX and R6XX (Hi-Capa / 2011) series replicas by Army Armament. Also fits Baba Yaga - SRC. We recommend replacing the nozzle for CO2 blue nozzle. Weight: 355 g Material: metal
G36 Magwell Conversion Kit. Direct replacement for Tokyo Marui/Jing Gong G36 Series AEG magwell. Take M4 Magazine to work with your G36 Series AEG (G36C, G36K, G36E, etc...).
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
Replacement of Standard Magazine for Thompson M1A1 AEG . Plastic 6mm Bb's only . Capacity: 60 Rounds . Weight(Gram): 100
Set of 5 shells for Double Bell / DBoys Kar98 replicas Manufacturer ACM Material Metal Quantity 5 shells for each set Weight 15g each Package of 5 Round FULL Metal Constructed Each Cartridge can hold ONE bb
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by Double Eagle specially for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. In the set with replica you have a...
A long-awaited replica of ARMY ARMAMENT's 1911 Darkstorm already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction. Please note!!! Gun...
Steel: 420 Stainless Handle: Aluminum Blade lenght: 84mm Blade thickness: 2,8mm Closed lenght: 119mm Weight: 124g
Speedloader for Magazines Made from semi-transparent polymer. The tool allows for rapid and accurate loading of Mid / Low / Real-cap magazines and all kinds of gas grenades or mines. The speedloader has the shape of a pistol magazine so it can be easily stored inside a magazine pouch. The set also includes an adapter that makes it easier to fill sniper...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
![P90 CM.060B SMG [CYMA]](https://airsoftguns.ie/14876-home_default/p90-cm060b-smg-cyma-.jpg)
![M4 CM.603 - BLACK [CYMA]...](https://airsoftguns.ie/15624-home_default/m4-cm603-black-cyma-airsoft-rifle.jpg)
![M4 CQB CM.517 - BLACK [CYMA]](https://airsoftguns.ie/12103-home_default/m4-cqb-cm517-black-cyma-.jpg)
![M58A PUMP SHOTGUN - BLACK [EE]](https://airsoftguns.ie/10983-home_default/m58a-pump-shotgun-black-ee-.jpg)
