The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 0.8kg
Price
Price
€1.00 - €165.00
Subcategories
There are 198 products.
Active filters
100: 200 High Torque reinforced gear set The set of reinforced gears that were made of steel. Gears are adapted to power tuning. The whole set is compatible with V2 and V3 gearboxes. You can safely use a battery with increased current efficiency (models 10.8V and higher) with gearboxes equipped with this set of gears. Recommended springs: M150-M180.
AEG Motor Brush - Designed to replace the original AEG Motor Brush Set
Weight: 70 g Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
A complete V3 gearbox from the BLUE series with wiring to the stock. It is a complete gearbox ready for installation in the replica. It is equipped with metal gears with a standard ratio of 18: 1, a polymer piston with a full metal rack. Silent aluminum cylinder and piston head. The cylinder is made of anodized aluminum, resistant to abrasion and...
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Weight: 160 g Accumulator type: metal Accumulator connector type: T-CONNECTOR (DEANS) Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Hop-Up rubber made from silicon. It is designed for mechanism with spring up to 120 m/s.
Airsoft AEG SHS Gearbox ver.7 Spring set - Steel Construction - Anti-Reversal Latch Spring- Power Box Spring- Cut Off Lever Spring- Tappet Spring
6,03mm steel precision inner barrell - 590 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Design for Airsoft Electric Gun AEG Gearbox - Version II, Enhanced Stock Wire Set for battery on front, , Perfectly welled together for maximum current flow
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
Pack of washers, manufactured by Guarder in steel, indicated for gear adjustments. Indicated for Marui AEG. A set of gearbox shims of different diameters and thicknesses. The set includes per six 0,15mm, 0,30mm and 0,50mm diameter pads. The shims are used to balance the level of the thread-wheels in the gearbox and, what is followed by it, for the most...
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Has been carefully made of chrome plated brass. Fits all replicas in the type 96 standard such as Well MB01/06/08. When mounting this barrel in CM.702 / 706 replicas, it is necessary to replace the hop-up bucking with a 96 type bucking. Precision inner barrels allow...
Designed for: the M16A1/ A2/ VN AUG+ type replicas Diameter: 6,01 mm Length: 509 mm Weight: 70 g Made of: stainless steel and aircraft aluminum Manufacturer: Modify
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
ENERGY Enhanced Loading Muzzle- For Tokyo Marui M1911 GBB Airsoft Pistol
![HOP-UP RUBBER 50A [BATTLEAXE]](https://airsoftguns.ie/12285-home_default/hop-up-rubber-50a-battleaxe-.jpg)
