The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1.1kg
Price
Price
€1.00 - €165.00
Subcategories
There are 302 products.
Active filters
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM.132S, CM.121S, CM.123S, CM125S and similar equipped with a small Deans connector. Does not...
Weight: 375 g Material: aluminum color black
Battery NiMH 3000mAh 8,4V - large type [8FIELDS] Dimensions of pack: 154 × 45 × 22 (mm)Capacity: 3000 mAhVoltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: small TamiyaAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, P90 series
Weight: 20 g Material: steel Length: 172 mm
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
King Arms Tappet Plate for M14 AEG Gear Box v.7, high-quality part which provides high-performance and extra durability. Made from high-strength ABS plastic
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
A complete V3 gearbox from the BLUE series with wiring to the stock. It is a complete gearbox ready for installation in the replica. It is equipped with metal gears with a standard ratio of 18: 1, a polymer piston with a full metal rack. Silent aluminum cylinder and piston head. The cylinder is made of anodized aluminum, resistant to abrasion and...
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
Airsoft AEG SHS Gearbox ver.7 Spring set - Steel Construction - Anti-Reversal Latch Spring- Power Box Spring- Cut Off Lever Spring- Tappet Spring
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
For removing pin from battery connector plug Suitable for LargeType Plug
6,03 steel precision inner barrel - 247 mm Precision inner barrel with a length of a 247 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
100: 200 High Torque reinforced gear set The set of reinforced gears that were made of steel. Gears are adapted to power tuning. The whole set is compatible with V2 and V3 gearboxes. You can safely use a battery with increased current efficiency (models 10.8V and higher) with gearboxes equipped with this set of gears. Recommended springs: M150-M180.
