The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 0.8kg
Price
Price
€1.00 - €165.00
Subcategories
There are 217 products.
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
SHS Hop Up Chamber Set for airsoft G36 Series/SL8/SL9/UMP AEG, Original Hop Up Chamber. Upgrading AEG require necessary skill & technique
Complet spring set for gearbox MP5. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
The pin is designed for the body of the G36 type replicas.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
Weight: 40g Material: aluminum HIGH PERFORMANCE HOP-UP FOR M4/M16
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
Knife + clip H254G10 made of 100% metal
Army survival pocket knife from the well-known brand Fosco with fire starter and flashlight. Cut, make fire and illuminate with the same knife! This black, stainless steel survival knife from the brand Fosco has a Fire Steel in the handle with a flashlight, so you can make fire and have light under all circumstances. There is also a whistle in the handle...
Product Code: NMOP003 Product Brand: Systema Replace Original Motor Spring for Marui Airsoft AEG SUITABLE FOR SYSTEMA MOTOR ONLY
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Spring guide for version 6/7 gearbox. ULTIMATE® spring guides has steel bearings and rotatable guide. This minimizes friction when the spring is compressed, primarily effecting the rate of fire.
SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for M4/M16 series Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
Included 3-Ring Hop-up Bucking Adjustable Outer Diameter Reduced Barrel Vibration Balanced Weight
A complete V2 gearbox from the BLUE seriesequipped with a MOSFET system. It is a complete gearbox ready for installation in the replica. It is equipped with metal gears, a polymer piston with a full rack,piston head and silent aluminum cylinder. Bearings with a diameter of 8 mm are mounted in the gearbox shell. The mosfet system is equipped with an...
King Arms Tappet Plate for M14 AEG Gear Box v.7, high-quality part which provides high-performance and extra durability. Made from high-strength ABS plastic
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Complete, assembled gearbox with the engine, trigger switch and wiring for P90 replicas. Dedicated to 60 cyma replicas. CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be cancelled. Weight: 730 g
