The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 0.8kg
Price
Price
€0.00 - €165.00
Subcategories
There are 266 products.
Active filters
It is a stock piston and piston head form CYMA, but it has been equipped with 15 steel teeth. Teeth are made of steel, which significantly contributes to the greater strength of the piston. Manufacturer: CYMA Weight: 30 g Material: ABS, steel CAUTION! Depending on the delivery, the piston may differ in color - there is no possibility of choosing a color....
Weight: 40g Material: aluminum HIGH PERFORMANCE HOP-UP FOR M4/M16
The silencer have 14 mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 110 g Material: aluminium Length: 130 mm
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
Vector Optics, a company delivering for over 10 years across the world, a wide range of innovative and high-quality riflescopes, red dot sights, laser sights, rangefinders, rail systems, flashlights and mounts design for real firearms. Designed for Real Fire Caliber, 200 Lumens, Cree Q5 Bulb, with Quick Release Mount Base for Pistol.
Design to install on Rear retractable stock of Marui AEG. Both left & right handed compatible. Look very good with bungee rifle sling. Steel metal adaptor. NOTE: Adaptor is designed for original AEGs stock pipe
Weight: 20 g Material: steel Length: 172 mm
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
The pin is designed for the body of the G36 type replicas.
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Provides optimal comfort and some of the most natural grip positioning, prevents fatigue, increases speed and long term accuracy. Weight: 75 g Color: dark earth Material: polymer Length: 130 mm Manufacturer: MP
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, P90 series
Theta Optics 2,5-10X40 Scope equipment is a quarantee of high quality for a reasonable price. Closed in a durable metal housing, transparent optics with a cross sight of mid-dot type and adjustable magnification. Thanks to the backlight of the crosshair (red,blue or green) you can use the scope successfully either during the day and night. The power...
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
Most beautiful always at your arm’s reach!Handy and solid binoculars that combine very good mechanical craftsmanship and best optical qualities. Recommended for tourists and enthusiasts of bird watching as well as for military games in the field. It is ideal for admiring stadium sports events as well as for concerts and other stage events.
SHS Original AEG Motor for Gearbox Ver.3 (Short Type) FEATURES: SHS standard motor short type. SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for AK / G36 Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
The adapter is made of aluminum with the use of CNC technology allows to attach the counter-clockwise 14mm diameter threads to the replicas equipped with a clockwise 13mm thread.
Very well made silencer set that consist flash hider and suppressor. Flash hider has special outer thread for suppressor quick detaching. The flash hider has 14mm counterclockwise inner thread. Weight: 260 g Material: aluminum, steel Color: black Length mm: 126 Diameter mm: 38
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
