The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€0.00 - €630.00
Subcategories
There are 844 products.
Active filters
- Full Metal Constructed - Red / Green Illuminated Dot, - 5 Levels Dot Brightness Control
Patch 3D PVC blood type B+ positive - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
Able to attach to duty belt or fasten to the leg. Universal holster suitable for most large pistol frame. Design for pistol with or without flashlight/laser attached. Right handed design. 2 spare magazine pouches. 1 flashlight or scope pouch.
Flag Ranger-black - Flag made of 100% polyester - Dimension: 1 x 1,5 m
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Patch black waterPatch with text/picture
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
Paracord made of 100% nylon with iron buckle Length: 20 cm.
Gillie suit special forces Made of cotton and nylon. Complete suit including head!
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal hop-up chamber and the...
Magazine pouch can hold 7.62 / .308 style magazines (HK417 / G3 / SR25 / M14 / AK47 / FAL / SCAR-H / SSR) and 5.56 / .223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
Adapter allows to mount the silencer to the sniper rifle CM.701, CM.702, CM.700, TM VSR-10, JG BAR-10. It have 14 mm counterclockwise thread.
Made by high density nylon material and metal hook. Suitable for shot to long frame rifle. 3-point design allow even distribution of gun weight on shoulder. Adjustable length.
The AGM MP-41 is a high-quality replica of the 1941 Maschinenpistole designed by Hugo Schmeisser. Unlike the MP-40, it features a solid, full-size wooden stock for improved stability and control, making it more suited for infantry use. The receiver is constructed from stamped metal alloy, enhancing durability and authenticity. Additionally, the MP-41...
Element Full Length XT Rail Panel Covers 3pcs/Pack Black - Made by Element- Gross Weight:80g- Fit 20mm Rail- Material:Nylon Plastic
Flag Airborne 101e div. black - Flag made of 100% polyester - Dimension: 1 x 1,5 m
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
