Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 1410 products.
Active filters
Steel sling balls, 7 mm caliber. Enables accurate and effective long distance shooting.Technical data:- Diameter: 7 mm- Quantity: 100 pieces- Weight: 157 g
Guarder airsoft hop up bucking improve shooting accuracy, ballistic trajectory stability, air-tightness & firmness. Constructed of Silica Gel that is hard.
A cotton camouflaging tape that is ideal as a replica or any other piece of equipment camouflage. A stretchy material that ideally adheres to camouflaged surface. Size;50mm x 5mts
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Color: white Weight: 0,25g Manufacturer: Rockets
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
A cotton camouflaging tape that is ideal as a replica or any other piece of equipment camouflage. A stretchy material that ideally adheres to camouflaged surface. Size;50mm x 5mts
SHS M90 AEG Upgrade Spring -- Full Metal Construction Upgrade Spring -- Suitable for most Airsoft Electric Gun
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
ELEMENT Accessory Series.- Essential Accessory protect your expensive scope from Dust, Water & collision. - Clear Lens Newly Design Protection Cover.
A cotton camouflaging tape that is ideal as a replica or any other piece of equipment camouflage. A stretchy material that ideally adheres to camouflaged surface. Size;50mm x 5mts
Made by high density nylon material and metal hook. Suitable for shot to long frame rifle. 3-point design allow even distribution of gun weight on shoulder. Adjustable length.
A set of mounting pins for the MP5 replica's body. Manufacturer: CYMA Weight: 2g Material: aluminum Number of pieces in the set: 2 Length mm: 29 Diameter mm: 6/8.4 Gun model: MP5
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet. Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head. Characteristics: - Retains its shape, flexibility...
Switch V.2 NB0027 A basic replacement of the trigger block - this piece consists of just the sliding contact & the trigger contact block; there is no wiring included. This is only for V2 gearboxes e.g. MP5, M4, M16 etc.
Color: black Material: nylon
Color: black Material: nylon
Unlike conventional vertical fore-grips, the MAGPUL STYLE PTS AFG™ Angled Fore Grip (Black), Airsoft takes into account natural body mechanics