Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 1412 products.
Active filters
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Weight: 215 g Length: 460mm Material: plastic Width: 85mm Hydration pack capacity: 2,5 l NOTE! Hydration pack just for cold drinks.
NOTE! Presented magazine can be powered only by green gas. Weight: 245 g Magazine type: Green Gas Magazine model: low-cap Material: aluminum Color: black Length mm: 140 Magazine capacity BBs: 20
Full metal 25mm low profile scope ring set. Install flashlight or scope onto any RIS 20mm weaver rail. Suitable for all flashlight or scope with 25mm diameter. Quick detachable design for fast installation or detachment.
25-round Green Gas metal magazine. Dedicated for WE-TECH M9/92FS series.
Magazine dedicated to the S&T M1903A3 and Kar98k bolt-action rifle replicas. Weight: 15 g Magazine model: low-cap Material: plastic Color: black Magazine capacity BBs: 25
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Made by high density nylon material and metal hook. Suitable for shot to long frame rifle. 3-point design allow even distribution of gun weight on shoulder. Adjustable length.
Made by high density nylon material and metal hook. Suitable for shot to long frame rifle. 3-point design allow even distribution of gun weight on shoulder. Adjustable length.
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard
Two-part 30mm optics mount for RIS rail (low) Made entirely of metal. It consists of two rings of a diameter of 30mm, screwing in with the Allen screws. Universal mounting allows for easy attachment to each replica equipped with a standard 22mm RIS rail. The inserts of cloth on the inner side of the rings protects the optics from being scratched. The set...
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
Product Description Spare magazine for KJ Works M4/M16 Series Airsoft GBB Rifle Constructed of FULL METAL housing that is strong to drop on the floor Top Gas ready right out of the box Suitable for 6mm Plastic BB only Loading Capacity: 30 Rounds
Magazine dedicated to the Lee Enfield SMLE No. 1 Mk III (S&T) rifle replica. Weight: 220 g Magazine model: low-cap Material: steel Color: black Magazine capacity BBs: 30