Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Replica Firearms for Airsoft are available at reasonable prices from our on-line store in Limerick. We stock a large variety of realistic Pellet Guns and BB Guns for Airsoft in Ireland. We sell top quality Replica Firearms all of our BB Guns can be delivered to any location in Ireland or world
Subcategories
There are 87 products.
Active filters
The Webley Revolver was the standard issue service pistol for the armed forces of the United Kingdom and the Commenwealth from 1887 until 1963. Webley Revolver is a top-break revolver with automatic extraction, which means those ammos will automaticlly extract from the chamber when users open the chamber. Webley MKVI was officially adopted in 1915 and...
This is the newest model from Wei-E Tech. This pistol is well known from movies, games and is also used by many of forces. The slide is made from high-quality aluminum and the lower body from a durable polymer.
Metal reinforced threaded outer barrel, chamber, recoil spring guide rod, on frame safety, slide stop, hammer and trigger Full metal heavy weight professional training weapon Threaded barrel for mock silencer attachments Railed frame for light, laser attachments Heavy weight gas blow-back with superb performance
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
M9A1 v.2 pistol replica by WE patterened on the most popular Italian pistol. The replica was performed with great accuracy and attention paid to details. The slide, the frame and the magazine were made of metal, whereas only grip covers, as in the real steel, were made of plastic. The covers are removable and have scrabrous non-slip texture. The...
M9A1 v.2 pistol replica by WE patterened on the most popular Italian pistol. The replica was performed with great accuracy and attention paid to details. The slide, the frame and the magazine were made of metal, whereas only grip covers, as in the real steel, were made of plastic. The covers are removable and have scrabrous non-slip texture.The...
1:1 Ratio Airsoft Replica of Real Steel, Full Metal Construction except the ABS texture Grip, Gas Operated Toggle Action function works like a real one, Toggle jump back & upward for each shot.
Standard Version of green gas WE M92 Airsoft Pistol, Full Metal Construction, Gas Blow Back Pistol with Semi-Automatic Shooting Mode, Extreme smooth slide cycling with clicks & clacks metal sound, 25+1 Rds High Loading Capacity Magazine.
Standard Version of Co2 WE M92 Airsoft Pistol, Full Metal Construction, Gas Blow Back Pistol with Semi-Automatic Shooting Mode, Extreme smooth slide cycling with clicks & clacks metal sound, 25+1 Rds High Loading Capacity Magazine.
Spring powered replica of Walther P99 pistol. Has original manufacturer's markings on slide and grip. Frame, slide, barrel, magazine and grip are made of high quality ABS composite. Made of metal are: trigger, magazine release button and safety lever. The replica is equipped with fixed HopUp system, which significantly improves the accuracy and range of...
Microprocessor charger for small capacity batteries, for AEP pistol replicas. The charger is plugged into a USB, so we can charge our battery using many devices or even a power bank. After the battery is charged, the loading process will automatically stop. Thus, the battery is protected against damage. The charging process is signaled by LEDs. NOTICE!...
Characterized by small size spring powered replica of H&K USP Compact pistol. Has original manufacturer's markings on slide and grip. Frame, slide, barrel, safety lever, magazine and grip are made of high quality ABS composite. Made of metal are: trigger, inner barrel and hammer. Magazine holds 12 rounds. Spring replica requires reloading after...
SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
Taiwanese replica of STTI company is made of ABS. Metal are trigger and hammer. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption.Set includes:* USP replica* Green Gas magazine
Taiwanese replica of STTI company is made of ABS. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity...
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic. The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The...
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic. The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The...