The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic.
The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The capsule is in the grip under the cladding. The grip is profiled, thanks to which the replica is very comfortable in the hand.
Loading the revolver is done in a similar way as in the flammable version - the bb's are loaded into the attached dummy shells, after which the finished cartridges are placed in the cylinder.
Speedloader for Magazines Made from semi-transparent polymer. The tool allows for rapid and accurate loading of Mid / Low / Real-cap magazines and all kinds of gas grenades or mines. The speedloader has the shape of a pistol magazine so it can be easily stored inside a magazine pouch. The set also includes an adapter that makes it easier to fill sniper magazines. |
High Capacity BB speed Loader (100rds, 6mm pellets) black
€4.95 |
|
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic.
The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The capsule is in the grip under the cladding. The grip is profiled, thanks to which the replica is very comfortable in the hand.
Loading the revolver is done in a similar way as in the flammable version - the bb's are loaded into the attached dummy shells, after which the finished cartridges are placed in the cylinder.
Velocity [FPS]: ~328
Type of fire: Single
Lenght [mm]: 350
Weight [g]: 1110
Magazine type: Special, for 6 shells
Hop-Up: No
Blow Back: No
Made of: Metal + plastic
Propulsion / Powered by: Gas propulsion - CO2 12g
Manufacturer: WELL
Warranty: 1month
The set includes:
- replica
- 6 shells
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic. The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The...
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
The Webley Revolver was the standard issue service pistol for the armed forces of the United Kingdom and the Commenwealth from 1887 until 1963. Webley Revolver is a top-break revolver with automatic extraction, which means those ammos will automaticlly extract from the chamber when users open the chamber. Webley MKVI was officially adopted in 1915 and...
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity...
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic.
The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The capsule is in the grip under the cladding. The grip is profiled, thanks to which the replica is very comfortable in the hand.
Loading the revolver is done in a similar way as in the flammable version - the bb's are loaded into the attached dummy shells, after which the finished cartridges are placed in the cylinder.
