Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 1252 products.
Knife + clip H254G10 made of 100% metal
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: tan
M9A1 replica is a reproduction of a popular Italian pistol. Replica was made from polymer and metal. It"s characterized by a nice weight - 1kg! because it"s almost full metal -skeleton, slide, magazine and barrel were made from metal. Only grip covers were made from polymer. Please note!!! Gun came without markings / serial number!!!
Vertical grip lightweight. M-LOK model. BLACK / GRAY color. Weight 40gr. Length 84mm.
Battery 8.4V 1100 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
DUO PACK Silicone grease + PTFE Grease is a set of special lubricants dedicated to professional users. Silicone grease effectively protects, insulates and maintains seals and pistons. It protects against moisture and has a wide operating temperature range from -50°C to 200°C
SC-01 - black [BOYI] from Boyi is very well made replica. Material used to build this rifle is aluminum worked by CNC technology (Upper Receiver) and resistant nylon fiber (Lower Receiver, stock, pistol grip) which is used to real gun production. On attention deserve precision flip-up folding sights with full regulation. Replica is equipped with three...
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Dog tag - Made of 100% metal- Gold color- (2 plates and 2 chains)
Patch 3D PVC Special Forces, airsoft Patch PVC with velcro at backside
Survival toolCan openerKnife edgeScrewdriverRulerCap opener4 position wrenchButterfly wrenchSaw bladeDirection ancillary indication2 position wrenchLanyard hole
Patch PVC Punisher - Patch PVC with velcro at backside
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
DOUBLE Magazine pouch MP5/UMG BLACK - Can be attached to any 1" MOLLE webbing vest, belt, bag, platform, backpack....etc
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
Weight: 5 g code IP ALARM
PLO scarf with print Made of 100% cotton