The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 171 products.
Active filters
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Product Information; Dedicated to replicas that conform to the Maruzen type 96 standard and similar. Action Army Hop Up Bucking for Type...
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
SHS M120 AEG Spring Material: Steel 110 m/s spring
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Made of: Aluminum Weight: 10g Manufacturer: Super Shooter/SHS
Ball-bearing silenced Bore-Up piston head A silenced Bore-Up piston head with ball-bearing. This is a high quality, made from durable polymer silenced piston head with ball-bearing. It is designed for use with Bore-up sets.
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
8mm oilless bushings For any 8mm gearbox. Manufactured by SHS. Made of steel. Incredibly durable.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
Steel Cut Off Lever for Ver.II Gearbox
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
Low-resistance cable length of 2 m [IPower]
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Dedicated to Marui standard replicas: VSR-10, Hi-Capa, Glock, PX4, FN5-7, P226, Detonics, M1911, MEU, SOCOM and similar. Also fits WE GBB...
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
Steel 16:1 gears set - high speed Weight: 75 g Material: steel
