The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0.01kg - 9kg
Price
Price
€4.00 - €600.00
Subcategories
There are 159 products.
Active filters
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
The SC-02 rifle airsoft gun is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of metal – of CNC machined aluminum to be precise. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the...
CNC Aluminum dummy silencer features a built-in tracer unit with a high power flash and ultra-sensitive motion sensor. Powered by 4x AAA batteries.Warning! When installing the batteries, make sure that the device is turned off and avoid touching sensitive electronic components - you will avoid short circuits and the risk of electric shock.
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
A very powerful non-blowback airsoft pistol optimal for skirmishing. Shoot as fast as you can pull the trigger.
Weight: 60 gColor: blackLength: 70mmMaterial: aluminum
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
Collapsible polymer stock suitable only for CYMA 077A AEG AK replicas. Offers a right-side folding, 5-position length of adjustability, and a rubber butt-pad with anti-slip surface. Weight: 410 g Material: polymer Color: black
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
A replica of the M712 pistol, it was made entirely of light alloys. Elements such as the trigger or hammer are movable and made of light alloys. This model does not have a blow-back system, but the safety and rear sight are functional. The replica is very durable and faithfully reproduced in relation to the original, the 1: 1 scale has been preserved.
A long-awaited replica of ARMY ARMAMENT's 1911 Darkstorm already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction. Please note!!! Gun...
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard
PKM machinegun replica The long awaited model of the universal PKM machinegun made by the A&K company was made of steel and aluminum. The bolt chamber, the chamber cover, the bipod, the carrying handle and the box magazine were made of steel, while as the rest of the elements, such as the outer barrel, the base of the front iron aiming sight, the gas...
Includes Free battery and charger. Functionally equivalent to the standard Steyer AUG rifle, the ASG/JG AUG A1 military version comes in a green finish and with a 1.5x standard scope.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
Designed for use on SMGs and carbines to provide faster target acquisition and accuracy. The best for two eyes open shooting to give the operator greater zone control. It has 10 levels of brightness adjustment of the red aiming point. Fits all standard Picatinny/Weaver rails. Powered by a single CR2032 battery (not inluded). The sight comes from the...
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
