The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 1402 products.
Active filters
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: MB
Knife + clip H254G10 made of 100% metal
Patch 3D PVC Navy Seals, airsoft - Dimension: 13 X 3 cm, - Patch PVC with velcro at backside
Professional quick-drying paint to mask, airosft weapons, vehicles and parts repairs.- Container: 400ml, PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND! PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
Deposit for pre-orders.
Replica of Knee and Elbow Pads used by US troops serving worldwide. High impact shatter resistant caps and soft foam covered by durable Nylon 1000D makes them good for ASG, paint ball, skating, installing floors or any kind of work or play where you need to protect your knees and elbows.Includes:* 2x Knee Pad* 2x Elbow Pad
Weapon Cleaner manufactured by Pro Tech Guns known for the highest quality, innovative products for technical applications in gunsmith and airsoft. It is designed to clean the rifle after the shooting. It is also an effective cleaner of airsoft AEG geraboxes and metal cleaner before oxidation. Degreases and removes old, roasted grease and dirt and is safe...
Knife + clip H254G10 made of 100% metal
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
QD swivel designed for fast attaching the sling.
Made by high density nylon material and metal hook. Suitable for shot to long frame rifle. 3-point design allow even distribution of gun weight on shoulder. Adjustable length.
Replica of the KP-05 pistol (green gas) The replica was made of metal and plastic. The lock, barrel assembly, all moving parts and the magazine are made of metal. The pistol's skeleton and the profiled pistol grip facings are made of plastic. The pistol has a RIS rail located under the barrel, allowing the installation of a laser sight, torch or any other...
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Paracord made of 100% nylon with iron buckle Length: 20 cm.
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
Made of: Aluminum Weight: 10g Manufacturer: Super Shooter/SHS
Weight: 140 g Length: 363 mm Internal diameter: 6,02 mm
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
