The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
USB charging cable and battery dock
Input Power: USB DC 5V 2A
Manufacturer: CYMA
For CYMA CM030 G18C AEP 7.2v Micro battery or similar
Charger for low-capacity batteries for AEP pistol replicas.
Remember that it is not allowed to charge the battery placed in the replica!
The battery fits the charger
[IP-MICRO]
ATTENTION!
* Simultaneous loading of two packages is prohibited and may cause a crash
* The packs get hot when charging, be careful when disconnecting them
* After charging is completed, to avoid electric shock, first disconnect the charger from the power supply
* After charging the battery, do not leave it connected for a long time
* Use in a dry and well-ventilated area away from heaters and direct sunlight
* During operation, it emits a small crackle, which is not a signal of malfunction.
* The optimum ambient temperature for charging is 10°C - 30°
Never leave a charging battery unattended. Especially do not connect it to the charger for the whole night!
It is recommended to place the battery in a "safe charging bag" when charging the battery.
Avoid short circuits of leads and mechanical damage to the battery.
Mechanical damage or improper charging of the battery may lead to fire!
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Weight: 170 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Accumulator voltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.
LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or three (11.1V) cells. These cells are small in relation to the offered capacity, thanks to which they can be used in replicas where space for a battery is...
Microprocessor charger for small capacity batteries, for AEP pistol replicas. The charger is plugged into a USB, so we can charge our battery using many devices or even a power bank. After the battery is charged, the loading process will automatically stop. Thus, the battery is protected against damage. The charging process is signaled by LEDs. NOTICE!...
Battery 8.4V 1100 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
For removing pin from battery connector plug Suitable for LargeType Plug
Battery NiMH 3000mAh 8,4V - large type [8FIELDS] Dimensions of pack: 154 × 45 × 22 (mm)Capacity: 3000 mAhVoltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
This combo pack contains a 7.4v lippo battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off, small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not like on picture)!!!
Weight: 70 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
Weight: 160 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
IPower nunchaku type Li-Po battery with a capacity of 3300mAh and a voltage of 7.4V. Its discharge current is 20C. It is equipped with a small Tamyia plug. LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or...
Dimensions: 12,9 x 2 x 1,2 (cm x cm x cm)Capacity: 1200 mAhVoltage: 7,4 VMaximum discharge power (semi fire): 24AMaximum discharge power (auto fire): 48A
9.6V NiMH Butterfly / Nunchuck Battery For Electric AEG - 1600 mAh is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube. NOTICE! Batteries are covered only by starting warranty.
USB charging cable and battery dock
Input Power: USB DC 5V 2A
Manufacturer: CYMA
For CYMA CM030 G18C AEP 7.2v Micro battery or similar
