The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Weight: 100 g
Color: black
Material: metal
Magazine model: low-cap
Manufacturer: CYMA
Low-cap magazines must be prepared in particular way before first usage. Steps that must be made:
* during first usage, magazine *MUST NOT* be fully loaded with bb`s,
* before first usage, magazine *SHOULD* be oiled with silicon oil for better working,
* during first usage, magazine *SHOULD* be loaded with few bb`s and subsequently core out. After magazine *SHOULD* be loaded with 10 bb`s more than first time and subsequently core out. Activity *SHOULD* be repeated until full mag capacity will be achieved.
* *REMEMBER*, If magazine is stored, it *MUST* be empty,
* *REMEMBER* to regularly oil the magazine with silicon oil.
28 rounds capacity double-stack magazine with a base pad for fast, smooth, positive reload. NOTE! Magazine dedicated to the R5XX and R6XX (Hi-Capa / 2011) series replicas by Army Armament. Also fits Baba Yaga - SRC. We recommend replacing the nozzle for CO2 blue nozzle. Weight: 355 g Material: metal
Forward grip for RIS rail, has a quick assembly system without tools. Weight: 90 g Color: black
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Bite Valve Cover keeps Bite Valve clean from dirt and debris. This 2.5L Reservoir is perfect for upgrade or replacement of your current reservoir. Huge Omega Access Port make filling & cleaning a simple task, while still deliver a solid & secure seal.
Replica grenade launcher is loaded by 40mm Green Gas Grenade (not included). The power of the shot and range depends on the type of grenades which you will use. Weight: 700 g Length: 235 mm Material: aluminum
High Quality Army Paint Spray Quick dry 400 ml.For use on weapons, vehicles, textiles, toolsEasy removable from most of surfaces PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
CAUTION! This unit suitable for Li-Po battery only. Specyfication: Charge current: 1.6 A for 3 cell, 2 A for 2 cell Balance current: 200mA for each cell Displey: 3x Bicolor LED Max. Charging Current: 3x 1600mA Size: 100mm * 60mm * 35mm
LITEBUCK Molle System Strobe LED Light (Orange)- LITEBUCK is high performance strobe light system- IPX 7 waterproof constructed and 30 meters height shockproof- High power LED can be used for close distance lighting purpose- Suit for LITEBUCK Strobe Light series Products- For Exchange Light Color- 1x Orange Color LED
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
Complet spring set for gearbox G36. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5g Material: steel
Army survival pocket knife from the well-known brand Fosco with fire starter and flashlight. Cut, make fire and illuminate with the same knife! This black, stainless steel survival knife from the brand Fosco has a Fire Steel in the handle with a flashlight, so you can make fire and have light under all circumstances. There is also a whistle in the handle...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
GOGGLES FL8013 Transparent Weight: 5 g Material: ABS Color: black Protective visor: plexiglass Color of glasses: transparent
NOTE! Compatible with most 1911 Airsoft pistols (Army, APS, KJW, Tokyo Marui).NOTE! Presented magazine can be powered only by Green Gas.
Weight: 185 g Magazine type: Green Gas Magazine model: low-cap Magazine capacity: 23 BBs Material: ABS Color: black code GG-107M NOTE! Presented magazine can be powered only by green gas.
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
Weight: 100 g
Color: black
Material: metal
Magazine model: low-cap
Manufacturer: CYMA
