The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
Tactical baseball cap in OD Green color with six ventilation holes and four velcro panels.
Intended for use in hot weather conditions. Mid-depth cut works with variety of LE/Mil headgear systems.
Product:
- Four Velcro panels (at the front, at the top, and two in the back)
- Six vent holes
- One size fits all
- Dimensions of all velcro panels:
- FRONT: 90 x 50 mm
- TOP: length 60 x 55 mm
- REAR: length 45 x 40 mm
- PANEL ON ADJUSTMENT STRAP: length 80 x 25 mm
- Material: 60% Cotton, 40% Polyester
- Weight: 75g
The universal holster is mounted on the MOLLE system is additionally equipped with a spare magazine pouch.
Great replica in scale 1:1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by Double Eagle specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. In the set with replica you have a magazine...
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside. Weight: 780 g Material: nylon 600D Camouflage: olive Length mm: 1000 Height mm: 280 Width milimeters: 80
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
DESCRIPTION Made of aluminum double seal cylinder head for M4 replica.Precisely machined on CNC, guarantees high compression.CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled.
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Aluminum construction removable carry handle. Adjustable sighting. Universal fit for all standard flat top receivers on M4/M16 AEG.
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
M1918 BAR replica magazine of S&T company, which can be found on our website. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: before first usage, magazine SHOULD be oiled with silicon oil for better working, REMEMBER, If magazine is stored, it MUST be empty, REMEMBER to regularly oil the magazine with...
Cartridge 6mm for Dan Wesson, 1 piece.
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: small TamiyaAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
The magazine fits replicas of many manufacturers, but we have realistically tested and confirmed the efficient operation of the models: CM.028 A, CM.028, CM.037, CM.028 S, CM.028 C, CM.031, CM.031 B, CM.036, CM.042A, CM.040 C, CM.039U, CM .039C, CM.042B, CM.042S, CM.042, JG0510, JG0509 The need for a delicate filing of the magazine hook can occur in...
If you own an AGM MP40 or STEN airsoft replica and want to enhance your capacity for longer and more intense skirmishes, the 120-round Mid-Cap magazine is an excellent solution. Not only is it a practical addition, but it also allows for a more realistic experience during shooting.
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Tactical baseball cap in Black color with six ventilation holes and four velcro panels.
![Airsoft M309 Pump Shotgun - Black [EE]](https://airsoftguns.ie/16263-home_default/airsoft-m309-pump-shotgun-black-ee-.jpg)
![100CM RIFLE BAG - OLIVE [PJ]](https://airsoftguns.ie/19282-home_default/100cm-rifle-bag-olive-pj-.jpg)
![M4 CM.513 [CYMA]](https://airsoftguns.ie/12827-home_default/m4-cm513-cyma-.jpg)
